Fire Stopping in Tovil
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Tovil and the surrounding area. Send details for a fixed quote.
- Fire-rated sealant that has cracked or shrunk back
- Head-of-wall gaps with no fire seal
- Snag lists that include open service penetrations
Fire stopping in Tovil
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Fire stopping in Tovil, done properly
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on buildings around Tovil. We work on small duct penetrations where the tested detail allows, cable penetrations and linear gaps at wall heads, and the usual reasons a site gets in touch are head-of-wall gaps with no fire seal and fire-stopping items raised at inspection or handover. One point of contact handles commercial sealant work in Tovil from the first photos to the final walk-round, for single jobs and planned programmes alike.
Fire-rated sealing in a place like Tovil is usually a single building at a time. Send the specification, drawings or photographs of the openings and we’ll quote to suit.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Tovil (ME16, ME15)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Fire stopping in Tovil: the local picture
Tovil is about 31 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Campus buildings at universities such as University for the Creative Arts (to the north-west of Tovil) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. Office fit-outs on sites such as Tovil Green Business Park (less than half a mile south of Tovil) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Tovil is about 1 mile west of Maidstone, in Kent. Businesses, contractors and managing agents in Tovil can call on us for service penetrations. Tovil is one of 931 places in Kent on our list for service penetrations. For work in that direction, see our London page.
Business premises anywhere in ME16 and ME15 are within our area for service penetrations. Streets here include Tovil Road, Wharf Road and Bower Lane. We also cover Maidstone (1 mile east), Foley Park (2 miles north-east), Penenden Heath (2 miles north-east), Shepway (2 miles south-east) and Ringlestone (2 miles north) for service penetrations. Bigger towns within reach include Sittingbourne (11 miles north-east), Sevenoaks (14 miles west), Royal Tunbridge Wells (14 miles south-west), Gravesend (13 miles north-west), Tonbridge (11 miles south-west) and Northfleet (14 miles north-west).
Near you in Tovil
Around Tovil, our work takes us to commercial buildings near River Len LNR, St Augustine Academy and Oakwood Park Grammar School, among other places. Tovil’s nearest station is Maidstone West station, roughly 0.5 miles north-east of the centre. Well-known places in the area include Kent Fire Brigade Museum (less than half a mile south-east) and Allington Castle (2 miles north). Not far away are Boxley Hills and Burham Down.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Work in places the size of Tovil is planned as a single visit where we can. Clear photographs and measurements help us bring the right products.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Tell us which areas need to stay in use
- Have the specification and drawings to hand
- Flag any permit to work we’ll need
Ask for a quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call the office on 01277 525 020 or send photos by email to discuss it first.
Related advice
What we’re called out for in Tovil
Some service penetrations were never sealed at all, often hidden above suspended ceilings or behind boxing. Inspections, refurbishments and ceiling access usually bring them to light.
Site and facilities staff are often the first to spot these:
- Builders’ foam or ordinary silicone in compartment walls
- Open linear gaps along the top of fire-resisting walls
- Damaged fire seals in risers and voids
- Unsealed openings around new pipes and cables
Workshops and IT rooms at colleges like MidKent College Maidstone Campus (to the north-west of Tovil) are re-serviced often, leaving penetrations to seal.
Questions to ask before you book
- Proof of insurance
- Which product they’ll use, and why it suits the joint
- Their pre-qualification and accreditations
- How the existing material will be dealt with
Places near Tovil
Also in Tovil
How the quote is worked out
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- Quantities, in metres or numbers
- The size and state of each joint
- The site’s rules and procedures
- Working within restricted access windows
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What to include in your enquiry
The more we know, the firmer the quote. Helpful details to send:
- Whether the building will be occupied during the work
- Any specification or named product
- Drawings or a marked-up plan, if available
- A wide shot and a close-up of the area
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, ring 01277 525 020 or use the quote form.
When it isn’t the sealant
Being straight saves everyone time. New sealant won’t cure:
- Issuing fire ratings or certificates for seals
- Fire risk assessments, a job for a competent assessor
- Deciding what a wall or floor needs, which belongs to the designer
If in doubt, call 01277 525 020 or email drawings and photos and we will say what we think before you book.
Joints and surfaces we work on
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
FAQs: Tovil
Can work at a site such as University for the Creative Arts fit around teaching?
Yes. Education sites usually want the work in vacations or in phases during term, and we plan to suit. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Would you work within a site like The Somerfield Hospital?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Does weather matter for sealant work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How do I request a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or email us. Include photos or drawings if you have them.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure.
Can the sealant be colour-matched?
It depends on the product. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.