Fire stopping in Stone Copse
Need fire stopping in Stone Copse? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed joints where partitions meet the slab
- Fire-stopping items raised at inspection or handover
Fire stopping for businesses in Stone Copse
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Stone Copse, done properly
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal, not a rule of thumb. We work on pipe penetrations, cable penetrations and small duct penetrations where the tested detail allows, and what we are called in for most is hidden openings found during inspections and expanding foam used as fire stopping. Most enquiries from Stone Copse start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Smaller places such as Stone Copse still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job we finish is backed by a 12-month workmanship guarantee, in Stone Copse as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Stone Copse (RG18)
- Wider area
- West Berkshire
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Do you need fire stopping in Stone Copse?
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Common reasons buildings call us in:
- Builders’ foam or ordinary silicone in compartment walls
- Open linear gaps along the top of fire-resisting walls
- Penetration schedules that need working through
- Old intumescent sealant that has split away
At a college such as Newbury College (2.8 miles south-west of Stone Copse), checking penetration seals after summer M&E works is good practice.
What your quote should include
- What the guarantee covers, and for how long
- What level of public liability insurance do they hold?
- Their pre-qualification and accreditations
- Will CSCS-carded applicators be on site?
Why act early in Stone Copse
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Around Stone Copse, it’s better to renew all the failing joints at once. Send photos of each area and we’ll quote for the lot.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why clients in Stone Copse choose us
- Work to your specification and the manufacturer’s guidance
- 12 months’ guarantee on every job
- One number for every site we cover
- Joints cleaned back to sound surfaces
Read our cost guide or how we’re accredited.
Fire stopping in Stone Copse: the local picture
The area within 2 miles of Stone Copse holds a good number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. Stone Copse is about 52 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product.
Where a unit on an estate such as Turnpike Road Industrial Estate, which lies south of Stone Copse, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail. Wherever services are added at a hospital such as West Berkshire Community Hospital, 0.9 miles south of Stone Copse, the compartment line has to be made good with the specified product.
Stone Copse is about 2 miles north-east of Newbury, in West Berkshire. Across the RG18 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Stone Copse is one of 140 places we cover in West Berkshire for service penetrations. Our Reading page has more on work in that area.
We cover the RG18 postcode districts for service penetrations. Nearby places we also cover include Benham Hill (1 mile south), Ashmore Green (1 mile east), Cold Ash (1 mile east), Curridge (2 miles north) and Longlane (2 miles north). A short drive away, we cover Burghfield Common (10 miles east), Hungerford (10 miles west), Fords Farm (12 miles east), Little Heath (11 miles east), Calcot (11 miles east) and Lambourn (12 miles north-west).
Landmarks near Stone Copse
Locally, jobs take us to sites close to Victoria Park, Trinity School and Trinity School and the streets around them. Stone Copse’s nearest station is Newbury Racecourse station, about 1.5 miles south of the centre. Other landmarks nearby include West Berkshire Community Hospital (0.9 miles south) and British Balloon Museum & Library Ltd (1.7 miles south-west). Not far away are Nature Discovery Centre.
On site: what to expect
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and work section by section so the rest of the building stays in use. For work around Stone Copse, we aim to finish in one visit, so photographs and measurements up front really help. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Send your site hours and access windows
- Have the specification and drawings to hand
- Flag any permit to work we’ll need
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Advice
Keeping the joints sound
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Don’t let anyone top up a fire seal with the wrong product
- Treat an open penetration as a priority repair
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Look above ceilings when tiles are lifted for other jobs
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail, by someone who knows the system.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open.
Nearby places to Stone Copse
Also in Stone Copse
Commercial clients in Stone Copse
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Building owners and managing agents use us on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Signing off or certifying a building’s fire stopping
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Plastic pipes whose detail calls for a collar or wrap
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we’ll tell you honestly before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
FAQs: Stone Copse
Can you seal around new services in a hotel near Stone Copse?
Yes. We install fire-rated and intumescent sealant where it is specified. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
What does the BS 476 change mean for fire-rated sealant in Stone Copse?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
What’s the quickest route to a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Does weather matter for sealant work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.