Fire stopping in Silver Street
Looking for fire stopping in Silver Street? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire stopping installed outside its tested range
- Hidden openings found during inspections
- Damaged fire seals in risers and voids
Fire stopping in Silver Street
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Doing it in-house
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Fire stopping for commercial buildings in Silver Street
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on sites in Silver Street. Most enquiries involve expanding foam used as fire stopping and seals that don’t match their tested detail, on joints between fire-resisting walls and floors, service gaps in risers and cable penetrations. Facilities teams, main contractors and managing agents in Silver Street tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller places like Silver Street, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Silver Street (ME9)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Silver Street: questions and answers
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Silver Street?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you work at a site such as Kent Science Park, by Silver Street?
Yes. Estates, retail parks and business parks around Silver Street, Kent Science Park among them, are all within reach. To start, just call 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, which many sites require.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
What we can’t put right
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Issuing fire ratings or certificates for seals
- Deciding what a wall or floor needs, which belongs to the designer
- Construction that lacks the fire resistance the seal relies on
If you are not sure, just ring 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Include service cupboards in routine inspections
- Have penetrations checked while they can still be seen
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Don’t let anyone top up a fire seal with the wrong product
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small; found late, it can be one of many.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. For work around Silver Street, we aim to finish in one visit, so we ask for photos and rough sizes first. Then the right materials arrive with us.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Send your site hours and access windows
- Arrange parking or a loading space
- Let us know about inductions and permits
Get a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, speak to us on 01277 525 020 or email the details over.
Read more
Also near Silver Street
More services for Silver Street
What affects the price in Silver Street
Quotes vary with the job. It mainly depends on:
- Working within restricted access windows
- Quantities, in metres or numbers
- Access and working height
- How much existing material needs removing
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What we need to price the job
Good information means a firmer quote. Helpful details to send:
- What the building is and how it’s used
- The asbestos register, for older buildings
- A wide shot and a close-up of the area
- The postcode of the building
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
How the job changes by surface
Drylining partitions
Drylined fire walls are tested in a particular build-up. The sealant detail has to be tested in that wall type, with the stated board layers before sealing.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement, with no gaps along the run.
Service penetrations in Silver Street buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. At about 36 miles from central London, Silver Street is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls, and the gaps need sealing with the specified product.
Workshops and IT rooms at colleges like Sittingbourne College (to the north-east of Silver Street) are re-serviced often, leaving penetrations to seal. Office fit-outs on sites such as Kent Science Park, 1.4 miles to the east of Silver Street, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. Large healthcare estates like Sittingbourne Memorial Hospital (to the north-east of Silver Street) change their services often, so penetration seals are worth checking after M&E work.
Silver Street is about 3 miles south-west of Sittingbourne, in Kent. Silver Street sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. 931 places across Kent fall within our area, including Silver Street. London is covered too, some 36 miles away.
Postcode districts covered here: ME9. If your building is just outside Silver Street, we cover Bredgar (1 mile east), Oad Street (1 mile north-west), South Green (2 miles west), Danaway (2 miles north-west) and Chestnut Street (2 miles north). Bigger towns within reach include Maidstone (8 miles south-west), Ashford (14 miles south-east), Sittingbourne (3 miles north-east), Whitstable (15 miles east), Faversham (8 miles east) and Minster (9 miles north-east).
Landmarks near Silver Street
We work on buildings around Westlands School and Cromers Wood, among other places. The nearest railway station is Sittingbourne station, roughly 2.8 miles north-east of the centre. Nearby you’ll also find Sittingbourne Heritage Museum (2.9 miles north-east) and Bayford Court (3.1 miles north-east). The countryside around Silver Street includes Detling Hill.