Coloured and colour-matched sealant in Silver Street, Kent
Coloured and colour-matched sealant for visible joints in Silver Street. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Fit-outs with a sealant colour in the specification
- Sealant that no longer suits recoated frames
- Previous reseals that don’t match the original
Need coloured sealant in Silver Street?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How the job changes by surface
Natural stone
Sandstone, limestone and granite each have distinct tones. We choose from the product’s range and agree the colour with you after a sample if needed.
Powder-coated and anodised frames
Anodised and metallic frames rarely have an identical sealant colour. We show you the closest options in the product’s range.
Coloured sealant in Silver Street, done properly
A coloured bead has to perform like any other sealant. Each joint is cleaned, backed to depth and tooled firmly onto both faces, with no shortcuts because it’s decorative. Careful masking keeps the edges crisp. If you have standard-colour sealant spoiling a high-end finish and sealant that no longer suits recoated frames, we can help. Searching for sealant specialists in Silver Street? We have been sealing commercial buildings since 2005.
Work in smaller places such as Silver Street tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Silver Street (ME9)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Your questions answered
Can you match sealant colours for premises in Silver Street?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Available colours for the product are confirmed with the quote.
Can you work at a site such as Kent Science Park, by Silver Street?
Yes. Estates, retail parks and business parks around Silver Street, Kent Science Park among them, are all within reach. Photos and a short description are enough for a first look.
How do I request a quote?
You can use the quote form on this site; alternatively, speak to us on 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Is Silver Street in your area?
Yes. Silver Street is in our area and the rest of Kent. To discuss a job, phone 01277 525 020 or send details through our quote form.
Can the building stay open while you work?
Usually, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Nearby places to Silver Street
More services for Silver Street
Owners, agents and contractors
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
What happens if it’s left?
Across a chain of shops or hotels, consistency matters. Setting one product and colour for every site avoids variation. Around Silver Street, it’s better to renew all the failing joints at once. Send photos of each area and we will quote for the lot.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why choose Mastic Doctor in Silver Street
- One phone line for London, the South East and Scotland
- Specification-led, product-correct work
- Fully insured, including public liability cover
- Coloured sealants to suit the setting, where available
See how commercial sealant jobs are priced or how we’re accredited.
What Silver Street’s businesses ask us to seal
Silver Street sits in one of the drier corners of the country, the South East. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it. At about 36 miles from central London, Silver Street is within reach of the capital. The commuter belt holds a great many offices, retail parks and business parks. Multi-site occupiers here often want one sealant contractor across all their buildings.
If you run an office at a site such as Kent Science Park, which lies east of Silver Street, the sealant at reception desks, tea points and frames ages with each fit-out. Shops and cafés around stations like Sittingbourne station, 2.8 miles north-east of Silver Street, trade from early, so work is timed around them.
Silver Street is about 3 miles south-west of Sittingbourne, in Kent. We cover commercial sites throughout Silver Street, whether it’s a single job or part of a planned programme. Silver Street is one of 931 places we cover in Kent. There’s a separate page for London, roughly 36 miles from Silver Street.
We cover the ME9 postcode districts for colour-matched joints. Sites close to Silver Street are covered too, including Bredgar (1 mile east), Oad Street (1 mile north-west), South Green (2 miles west), Danaway (2 miles north-west) and Chestnut Street (2 miles north). Bigger towns within reach include Maidstone (8 miles south-west), Ashford (14 miles south-east), Sittingbourne (3 miles north-east), Whitstable (15 miles east), Faversham (8 miles east) and Minster (9 miles north-east).
What’s near Silver Street
Recent enquiries here include premises near Westlands School and Cromers Wood, among other places. For rail, the closest station is Sittingbourne station, roughly 2.8 miles north-east. Other landmarks nearby include Sittingbourne Heritage Museum (2.9 miles north-east) and Bayford Court (3.1 miles north-east). Open spaces near Silver Street include Detling Hill.
Should maintenance staff do it?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
After the work
Keep the joints in good shape with a few simple steps:
- Clean coloured joints with mild products
- Record the product and colour reference on the building file
- Avoid piecemeal repairs on coloured joints
- Agree the sealant colour early and write it into the specification
Let the joints cure as the manufacturer advises before they’re cleaned. Fresh coloured beads show fingerprints and dust more easily.
Use one product and colour reference across a building or brand. Consistency makes future work simpler for whoever reseals next.
Diagnose, treat, sign off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. If others near Silver Street need work, visits can be combined. You’ll have a fixed quote before work starts.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Agree which areas must stay open
- For older buildings, check the asbestos register before work
- Let building users know which areas are affected
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.