Fire-rated sealing and fire stopping in Shipley Bridge, West Sussex
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Shipley Bridge and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Fire-stopping items raised at inspection or handover
- Fire-rated sealant that has cracked or shrunk back
- Openings found when ceilings come down for a refit
Fire stopping for Shipley Bridge sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What sets the cost
To price the job, we consider:
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
- Specialist products, such as fire-rated or hygienic sealants
- Travel to remote or island sites
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote once you have the details.
What we need to price the job
There’s no need for a formal survey. These details are enough to start:
- The postcode of the building
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
- Any dates the work must fit around
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or email drawings and photos with what you know.
Fire stopping in Shipley Bridge, done properly
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in. If you have openings left by services added after handover and unsealed penetrations discovered above suspended ceilings, we can help, on linear gaps at wall heads, pipe penetrations and cable penetrations alike. Whoever orders the work in Shipley Bridge, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For a smaller site near Shipley Bridge, we plan to do all the penetrations in one go, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Work we carry out in West Sussex comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or use the quote form and we will come back to it.
- Place
- Shipley Bridge (RH6)
- Region
- West Sussex
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Honest limits
Being straight saves everyone time. Fresh joints won’t solve:
- Construction that lacks the fire resistance the seal relies on
- Issuing fire ratings or certificates for seals
- Large openings beyond what any sealant detail covers
Not sure which it is? You can call the office on 01277 525 020 or use the quote form and we’ll tell you honestly.
What we seal
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
Why it’s worth doing now in Shipley Bridge
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail. Around Shipley Bridge, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we’ll quote for the lot.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Why clients in Shipley Bridge choose us
- Constructionline member for supplier checks
- Joints cleaned back to sound surfaces
- Our applicators hold CSCS cards
- One phone line for London, the South East and Scotland
See our cost guide or how we’re accredited.
Commercial clients in Shipley Bridge
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Diagnose, treat, sign off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Rural sites near Shipley Bridge may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Flag any permit to work we will need
- Confirm the product named in the specification
- Move anything stored against the joints
Getting a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Related advice
Nearby places to Shipley Bridge
Also in Shipley Bridge
Questions we’re asked in Shipley Bridge
Is a smaller place like Shipley Bridge outside your area?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can work in a care setting near Shipley Bridge go ahead while residents are there?
Yes. Care settings are planned area by area, at times agreed with the home. Tell us about any infection-control or safeguarding requirements and we’ll work to them.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Do you have third-party installer accreditation for fire stopping?
No, and we won’t imply otherwise. Third-party schemes aren’t a legal requirement, but many clients and main contractors ask for them. Where it isn’t required, we install the specified sealant to the maker’s details.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We’ll confirm the products and details used.
Compartment walls and floors in Shipley Bridge
Five care or nursing homes sit less than 2 miles from Shipley Bridge. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. We install fire-rated sealant to the tested detail where it is specified. At about 24 miles from central London, Shipley Bridge is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
In a hotel such as Marriott Courtyard Hotel (0.9 miles north-west of Shipley Bridge), new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Offices at parks like Maple Business Park (0.5 miles north of Shipley Bridge) are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
Shipley Bridge is about 2 miles south-east of Horley, in West Sussex. We cover Shipley Bridge and the rest of West Sussex, with the same fixed quotes and 12-month guarantee as everywhere else. Across West Sussex, 373 places are covered, Shipley Bridge among them. We also cover Brighton, around 22 miles from Shipley Bridge.
We cover the RH6 postcode districts. Buildings on Antlands Lane, Antlands Lane East and Peeks Brook Lane are within our area for service penetrations. Sites close to Shipley Bridge are covered too, including Burstow (1 mile north-east), Fernhill (1 mile north), Tinsley Green (1 mile south-west), Copthorne (1 mile south-east) and Forge Wood (1 mile south-west). Further afield, our area takes in Crawley (3 miles south-west), Horsham (10 miles south-west), Haywards Heath (10 miles south), Burgess Hill (13 miles south), East Grinstead (6 miles east) and Broadfield (5 miles south-west).
Landmarks near Shipley Bridge
Around Shipley Bridge, our work takes us to commercial buildings near Worth Park Gardens, The Gatwick School and Oakwood School, among other places. The closest station to Shipley Bridge is Gatwick Airport station, roughly 1.2 miles north-west. Nearby you’ll also find County Mall (3.2 miles south-west) and Effingham Park Motor Museum (2.1 miles east). Green spaces nearby include Hedgecourt Lake.
Common problems we fix in Shipley Bridge
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Look out for the following:
- Fire seals cut back for extra cables and never reinstated
- Fire stopping installed outside its tested range
- Unsealed penetrations discovered above suspended ceilings
- Fire-rated sealant that has cracked or shrunk back
For a unit at a centre such as County Oak Retail Park, which lies south-west of Shipley Bridge, penetration seals are worth checking after each shop fit.
Questions to ask before you book
- How they handle RAMS and site documents
- What the guarantee covers, and for how long
- Will CSCS-carded applicators be on site?
- Are they CHAS accredited or on Constructionline?