Fire-rated sealing and fire stopping in Fernhill, West Sussex
Planning work on a service penetration in Fernhill? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Old intumescent sealant that has split away
- Seals disturbed by maintenance and left open
- Openings found when ceilings come down for a refit
Fire stopping for Fernhill sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Fernhill
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance. If you have head-of-wall gaps with no fire seal and improvised or mixed-product fire seals, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Fernhill, preparation and product choice get the time they need.
A job near Fernhill is normally planned around one visit, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- Fernhill (RH6)
- Region
- West Sussex
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a building around Fernhill, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Getting the site ready
- For older buildings, check the asbestos register before work
- Let building users know which areas are affected
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
Also in Fernhill
Different surfaces, different methods
Metal pipes
Metal pipes conduct heat, so their details often call for extra measures along the pipe, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance.
Building owners, agents and FMs in Fernhill
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
FAQs: Fernhill
Do you cover business parks and estates near Fernhill, such as Maple Business Park?
Yes, sites like Maple Business Park are within our area, along with the rest of Fernhill. To start, just call 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Is a smaller place like Fernhill outside your area?
No. Places such as Fernhill are covered as much as the big towns. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photos and a postcode.
How long does a job like this take?
It depends on the scope, though a typical visit typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Should maintenance staff do it?
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Fire stopping around Fernhill: points for this area
At about 24 miles from central London, Fernhill is within reach of the capital. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Large healthcare estates like Spire Gatwick Park Hospital (Private), 2.1 miles to the west of Fernhill, change their services often, so penetration seals are worth checking after M&E work. In a building such as Church of St Bartholomew, any service penetration through a fire-resisting wall should be sealed to the specified detail. On a site such as Maple Business Park, less than half a mile to the east of Fernhill, every fit-out that runs new services through a compartment wall leaves penetrations to seal with the specified product.
Fernhill is about 2 miles south-east of Horley, in West Sussex. If you’re looking for fire stopping in Fernhill, we can help. Fernhill is one of 373 places we cover in West Sussex for service penetrations. Our Brighton page has more on work in that area (22 miles or so).
Anyone looking for fire stopping in RH6 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Peeks Brook Lane and Donkey Lane and the roads nearby. Close to Fernhill, our area also takes in Burstow (1 mile east), Shipley Bridge (1 mile south), Tinsley Green (1 mile south-west), Keeper's Corner (1 mile east) and Copthorne (1 mile south). Further afield, our area takes in Crawley (4 miles south-west), Horsham (10 miles south-west), Haywards Heath (11 miles south), Burgess Hill (14 miles south), East Grinstead (6 miles east) and Broadfield (5 miles south-west).
Local landmarks in Fernhill
Locally, jobs take us to sites close to The Shipley Bridge pub and the streets around them. The closest station to Fernhill is Gatwick Airport station, about 1 mile west. A little further out are Effingham Park Motor Museum (2.3 miles south-east) and Langley Green Hospital (2.9 miles south-west). Not far away are Hedgecourt Lake.
Honest limits
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Issuing fire ratings or certificates for seals
- Fire doors, dampers or other fire safety equipment
- Construction that lacks the fire resistance the seal relies on
If you’re not sure, just call the office on 01277 525 020 or email the details over and we will give you a straight answer before you book.
What we seal
- Pipe penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
Maintenance after handover
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Keep general-purpose fillers away from compartment walls
- Get seals inspected before ceilings and boxing close
- Check with the data sheet before painting over fire sealant
- File the specified details where the next contractor can find them
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.