Fire stopping in Saltwood
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Saltwood and the surrounding area. Send details for a fixed quote.
- Fire seals cut back for extra cables and never reinstated
- Improvised or mixed-product fire seals
- Unsealed joints where partitions meet the slab
Fire stopping near Saltwood
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Saltwood
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on buildings around Saltwood. The enquiries we see most involve non-fire-rated filler around services and fire-stopping items raised at inspection or handover, on linear gaps at wall heads, cable penetrations and joints between fire-resisting walls and floors. A single leaking joint is often how a building in Saltwood first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Barn and farm-building conversions near places like Saltwood often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Saltwood (CT21)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Doing it in-house
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Looking after the joints
A few simple habits keep the new joints working:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Include service cupboards in routine inspections
- Keep product data and details in the fire safety file
- Ask the designer to confirm details early on refits
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way, or a new specification from the designer.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job.
How the quote is worked out
The price varies from site to site. It mainly depends on:
- How much there is to seal
- Joint width, depth and condition
- Distance, for remote addresses
- Whether the work must be split into stages
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
What to include in your enquiry
A good diagnosis starts with the right details. Let us know:
- Where the site is, with the postcode
- How the joints are reached, and at what height
- Whether an asbestos survey exists
- When you need the work done
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or email a schedule or drawings.
Questions we’re asked in Saltwood
Will you take on work at estates like Shorncliffe Industrial Estate, close to Saltwood?
Yes. We cover Saltwood and the area around it, including industrial estates, business parks and retail parks such as Shorncliffe Industrial Estate. To start, just ring 01277 525 020 or email us with the unit, the joints involved and your access times.
Is Saltwood too far out for you?
No. Places such as Saltwood are covered as much as the big towns. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can you handle several sites?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Different surfaces, different methods
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter and we work within those limits.
Diagnose, treat, sign off
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, with the work itself normally taking longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For work around Saltwood, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Share your working hours and any access restrictions
- Move anything stored against the joints
- Tell us what induction or permit system the site runs
Getting a fixed quote
To get a fixed quote, speak to us on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
What sealant work can’t fix
Honesty saves time and money. New sealant won’t cure:
- Fire risk assessments, a job for a competent assessor
- Walls or floors that aren’t fire-resisting to begin with
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, call the office on 01277 525 020 or email the details over and we’ll say what we think before you book.
Joints and surfaces we work on
- Pipe penetrations
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
Also near Saltwood
Other services in Saltwood
Compartments and services around Saltwood
Saltwood has four care or nursing homes no more than 2 miles away. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. Saltwood lies roughly 58 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
Campus buildings at universities such as University Centre Folkestone, 4.6 miles to the east of Saltwood, see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. For a building such as Church of St Peter and St Paul, new heating or data runs are the usual reason penetrations need sealing. Where a unit on an estate such as Shorncliffe Industrial Estate, 2.8 miles to the east of Saltwood, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Saltwood is about 1 mile north of Hythe, in Kent. Saltwood sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Saltwood is one of 931 places we cover in Kent. We also cover Brighton, around 55 miles from Saltwood.
Anyone looking for fire stopping in CT21 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Old Saltwood Lane, The Green and Bartholomew Lane and the roads nearby. We also cover Hythe (1 mile south), Sandling (1 mile north-west), Pedlinge (1 mile west), Palmarsh (2 miles south-west) and Newingreen (2 miles west) for service penetrations. Bigger towns within reach include Ashford (10 miles north-west), Canterbury (14 miles north), Dover (10 miles north-east), Folkestone (4 miles east), Tower Hamlets (10 miles east) and Hawkinge (4 miles north-east).
What’s near Saltwood
Recent enquiries here include premises near Brockhill Park Performing Arts College, Brockhill Country Park and Red Lion Public House, among other places. The closest station to Saltwood is Sandling station, roughly 0.9 miles north-west. Nearby you will also find Royal Victoria Hospital (4.1 miles east) and Hythe Museum (0.8 miles south). Not far away are Tolsford Hill.