Saltwood expansion joint sealing
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Saltwood and the surrounding area. Send details for a fixed quote.
- New sealant over old, now failing
- Debris jammed in movement joints
- Damp inside where a wall movement joint has failed
Expansion joint sealing for businesses in Saltwood
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Saltwood
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises, and the bead is tooled so it grips the two faces alone. If you have previous reseals laid over old sealant and water dripping through deck or ramp joints, we can put it right, on car park decks and ramps, brickwork movement joints and cladding panel joints alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Saltwood, preparation and product choice get the time they need.
In and around smaller places like Saltwood, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Saltwood (CT21)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
How a job runs
We schedule the visit to fit the site hours and access windows you give us. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Jobs in and around smaller places like Saltwood are normally planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Agree which areas must stay open
- Let us know about inductions and permits
Ask for a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
Common problems we fix in Saltwood
Repeated failure often traces back to the wrong product. A stiff or general-purpose sealant across a joint with large movement won’t cope. Movement capability is set out in BS EN ISO 11600, and specifications often refer to it.
Most enquiries start with something like this:
- Expansion joints filled with dirt and stones
- Water getting into the wall through a failed joint
- Chipped joint edges on forklift routes
- Expansion joints split through the centre of the bead
For estates staff at a university like University Centre Folkestone, which lies east of Saltwood, building and paving joints are part of the planned maintenance list.
What your quote should include
- Will RAMS and insurance details be available?
- Whether primer will be used where the manufacturer specifies it
- How joint depth will be controlled
- What level of public liability insurance do they hold?
Different surfaces, different methods
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. We use a sealant made for wheel loads and the expected movement.
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. The right filler or sealant for the traffic and movement protects them.
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
If you are not sure, just call the office on 01277 525 020 or email the details over and we will give you a straight answer.
Where we work in Saltwood
- Podiums and floor movement joints
- Car park decks and ramps
- Cladding panel joints
- Blockwork control joints
- Precast concrete panel joints
- Brickwork movement joints
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
Warehouse floors and decks around Saltwood
Saltwood is within about 1 mile of the coast. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. Saltwood lies roughly 58 miles out from central London. Warehousing clusters around the motorways that ring and radiate from London.
Large sites such as Royal Victoria Hospital, 4.1 miles to the east of Saltwood, have car parks, service roads and long elevations with movement joints in brick and panels. Schools such as Saltwood CofE Primary School have movement joints in their walls and floors that are easy to overlook.
Saltwood is about 1 mile north of Hythe, in Kent. We cover Saltwood, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 931 places in Kent, from busy centres to rural villages. Our Brighton page has more on work in that area.
Work on movement joints is covered throughout CT21. Among the streets we cover are Old Saltwood Lane, The Green and Bartholomew Lane, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Hythe (1 mile south), Sandling (1 mile north-west), Pedlinge (1 mile west), Palmarsh (2 miles south-west) and Newingreen (2 miles west). Nearby towns on our patch include Ashford (10 miles north-west), Canterbury (14 miles north), Dover (10 miles north-east), Folkestone (4 miles east), Tower Hamlets (10 miles east) and Hawkinge (4 miles north-east).
Local landmarks in Saltwood
In Saltwood, that means premises near Brockhill Park Performing Arts College, Brockhill Country Park and Red Lion Public House. For rail, the closest station is Sandling station, about 0.9 miles north-west of the centre. A little further out are Royal Victoria Hospital (4.1 miles east) and Hythe Museum (0.8 miles south). For a walk, there’s Tolsford Hill.
Also near Saltwood
Other services in Saltwood
What affects the price in Saltwood
There’s no standard rate for sealant work, because every site is different. What we look at:
- Induction, permit and paperwork requirements
- Distance, for remote addresses
- How accessible the joints are
- Specialist products, such as fire-rated or hygienic sealants
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
What to include in your enquiry
Whether it’s one area or a whole building, these details speed things up:
- Access details, including height
- Your programme or deadline
- The product your specification calls for
- The postcode of the building
For a fixed quote, call the office on 01277 525 020 or send details through our quote form. You can also send details through our quote form.
Saltwood: questions and answers
Can you work at a site such as Shorncliffe Industrial Estate, by Saltwood?
Yes. We cover Saltwood and the area around it, including industrial estates, business parks and retail parks such as Shorncliffe Industrial Estate. To start, just call 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Can being near the sea in Saltwood affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Do the joint edges need to be sound before sealing?
Sealant needs sound faces to bond to, so we’ll tell you if the edges need repairing before sealing. Where it’s visible beforehand, we’ll say so when we quote.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.