Pollards Hill fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Pollards Hill and the surrounding area. Send photos or drawings for a fixed quote.
- Fire-stopping items raised at inspection or handover
- Open linear gaps along the top of fire-resisting walls
- Hidden openings found during inspections
Fire stopping near Pollards Hill
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Pollards Hill
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. We work on small duct penetrations where the tested detail allows, pipe penetrations and cable penetrations, and the failures we are asked to look at most are unsealed penetrations discovered above suspended ceilings and damaged fire seals in risers and voids. Whether you call it commercial sealant work, mastic application or joint sealing, in Pollards Hill it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
London has many occupied offices, blocks and mixed-use buildings where services are added and rerouted all the time. Where the specification names fire-rated sealant, it goes in exactly as the manufacturer’s test evidence shows for that wall or floor.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Pollards Hill (CR7, SW16, SE19)
- Region
- Greater London
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What happens if it’s left?
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed. Failed sealant in a building in Pollards Hill can quickly affect neighbours, tenants or the floor below. Putting it right early is less disruptive than dealing with the consequences.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Why us?
- One number for every site we cover
- Clear, fixed quotes
- Products installed to the manufacturer’s instructions
- Over 20 years of commercial sealing
See our cost guide and our accreditations.
Keeping the joints sound
A few simple habits keep the new joints working:
- Keep product data and details in the fire safety file
- Flag new cables with no seal around them
- Brief every trade that openings they make must be sealed
- Check with the data sheet before painting over fire sealant
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
What sets the cost
Your fixed quote is built from the real scope. It allows for:
- Whether the work must be split into stages
- Any access equipment needed
- Site requirements such as inductions and permits
- The size and state of each joint
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
Sending details for a quote
A good diagnosis starts with the right details. Tell us:
- A wide shot and a close-up of the area
- Access details, including height
- Whether an asbestos survey exists
- Specification clauses that apply
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, call 01277 525 020 or email drawings and photos.
When to call us in Pollards Hill
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Most enquiries start with one or more of the following:
- Openings found when ceilings come down for a refit
- Fire stopping installed outside its tested range
- Non-fire-rated filler around services
- Fire sealant pulled out of the opening
On a hospital site such as British Home & Hospital for Incurables, which lies north of Pollards Hill, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Questions to ask before you book
- Will RAMS and insurance details be available?
- Whether old or failed sealant will be cut out, not overlaid
- Is the sealant right for the movement and the substrate?
- Health and safety accreditation such as CHAS
Nearby places to Pollards Hill
What else we do in Pollards Hill
Our process
At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Most London premises stay occupied while we are on site, so zones and timings are agreed with whoever manages the building. Areas are handed back as each section is finished.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Tell staff and tenants when we will be in
- Arrange parking or a loading space
Quotes
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or send photos by email if you’d rather talk the job through.
Advice
FAQs: Pollards Hill
Would you work within a site like British Home & Hospital for Incurables?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you work in a care home near Pollards Hill with residents in?
Yes. We agree rooms and times with the manager and work a few areas at a time. Any site rules, from signing in to infection control, are agreed before we start.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Can you tell us what fire stopping our building needs?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
How long does a job like this take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
How do we ask for a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
Building owners, agents and FMs in Pollards Hill
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Pollards Hill can sit alongside others in a wider programme across Greater London.
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules.
Service penetrations in Pollards Hill buildings
There are four care or nursing homes within about 2 miles of Pollards Hill. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. In London buildings, frequent fit-outs and M&E changes are a common reason fire stopping gets breached. Penetrations are sealed with the specified product, to its tested detail, under the building’s own permit rules.
At a university such as King's College London, 4.2 miles to the north of Pollards Hill, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. Tenant changes at centres like Whitgift Centre (to the south of Pollards Hill) often mean new services through walls between units.
Pollards Hill is about 1 mile north of Thornton Heath, in Greater London. We cover Pollards Hill, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Pollards Hill is one of 764 places in Greater London on our list. Our London page has more on work in that area.
Postcode districts covered here: CR7, SW16 and SE19. Among the streets we cover are Green Lane, Croft Road and Downs Road, and sites on any of them can send details for a fixed quote. We also cover Norbury (1 mile north), Thornton Heath (1 mile south), Streatham (2 miles north-west), Streatham Park (2 miles north-west) and Mitcham (2 miles west) for service penetrations. A short drive away, we cover London (6 miles north), City of Westminster (8 miles north), Marylebone (8 miles north), Kensington (7 miles north-west), St Pancras (8 miles north) and Shoreditch (8 miles north).
Near you in Pollards Hill
In Pollards Hill, that means premises near Norbury Manor Business and Enterprise College for Girls, Silburn Reid and The Moon Under Water pub and the streets around them. For rail, the closest station is Norbury station, roughly 0.6 miles west of the centre. Nearby you will also find Crystal Palace Museum (1.5 miles north-east) and Croydon University Hospital (1.3 miles south). Green spaces nearby include Knight's Hill and Biggin Wood.