Norbury fire stopping
Fire stopping in Norbury, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Fire-rated sealant that has cracked or shrunk back
- Damaged fire seals in risers and voids
- Fire stopping installed outside its tested range
Fire stopping near Norbury
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Norbury
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and cable penetrations, and the usual reasons a site gets in touch are fire stopping installed outside its tested range and hidden openings found during inspections. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Norbury it comes down to the same thing: the right product in a properly prepared joint.
After a fit-out or new cabling in a London building, risers and ceiling voids are where open service gaps tend to be found. If sealant is the specified product we fit it to its tested detail, and if the detail needs something else, you’ll hear it from us.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Norbury (CR7, SW16, SE19)
- Wider area
- Greater London
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Why deal with it now?
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. Repeat call-outs disrupt occupied London buildings, so a proper job first time, with the old sealant fully removed, is worth it.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
Why us?
- CHAS accredited
- Fully insured
- Over 20 years of commercial sealing
- 12-month guarantee on workmanship
Take a look at what affects the cost and our accreditations and insurance.
FAQs: Norbury
Do you work on fire-rated sealing in hotels in Norbury?
Yes. We install fire-rated and intumescent sealant where it is specified. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Norbury?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
What do you charge?
Each job is quoted on its own details. To get one, give us a call on 01277 525 020 or email a schedule or drawings.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Quoting for work in Norbury
Quotes vary with the job. Expect it to depend on:
- How accessible the joints are
- Travel to remote or island sites
- Whether the work must be split into stages
- Specialist products, such as fire-rated or hygienic sealants
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- The type of building and who uses it
- Anything awkward about access or site hours
- The product your specification calls for
- A wide shot and a close-up of the area
To get a fixed quote, phone 01277 525 020 or email the details over. You can also send details through our quote form.
On site: what to expect
Before we leave any area, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. For a job in Norbury, access comes first: booked loading, goods lifts, the building’s permit system and a spot to keep materials. Send the building rules and access times with your enquiry.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Explain the parking and delivery arrangements
- Send any specification or drawings in advance
- Share your working hours and any access restrictions
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Advice
Fire stopping around Norbury: points for this area
With tenants changing and fit-outs following, London buildings see service routes altered again and again. We seal to the specification and the product’s tested detail, working within the building’s permits. Four care or nursing homes sit less than 2 miles from Norbury. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal.
For a unit at a site such as Thornton Road Industrial Estate, 1.5 miles south-west of Norbury, new power or data runs between office and warehouse can breach a compartment wall. In a retail centre such as Whitgift Centre, which lies south of Norbury, any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail.
Norbury is about 1 mile north of Thornton Heath, in Greater London. Any commercial site in Norbury is covered, for single jobs and planned programmes alike. Norbury is one of 764 places in Greater London on our list. There’s a separate page for London, roughly 6 miles from Norbury.
Work on service penetrations is covered throughout CR7, SW16 and SE19, whatever the building. We cover commercial and managed buildings on Green Lane, Croft Road and Downs Road and the roads nearby. We also cover Pollards Hill (1 mile north), Thornton Heath (1 mile south), Streatham (2 miles north-west), Streatham Park (2 miles north-west) and Mitcham (2 miles west). Bigger towns within reach include London (6 miles north), City of Westminster (8 miles north), Marylebone (8 miles north), Kensington (7 miles north-west), St Pancras (8 miles north) and Shoreditch (8 miles north).
Around Norbury
Around Norbury, our work takes us to commercial buildings near Norbury Manor Business and Enterprise College for Girls, Grangewood Park and Silburn Reid. For rail, the closest station is Norbury station, about 0.6 miles west of the centre. Well-known places in the area include Crystal Palace Museum (1.5 miles north-east) and Croydon University Hospital (1.3 miles south). Open spaces near Norbury include Knight's Hill and Biggin Wood.
How the job changes by surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Some intumescent sealants are tested on smaller plastic pipes. We confirm material and size first and tell you if sealant isn’t the right product.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do, and the detail may call for board patching or another product.
When to call us in Norbury
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Common reasons buildings call us in:
- Openings left by services added after handover
- Unsealed penetrations discovered above suspended ceilings
- Penetration schedules that need working through
- Fire stopping installed outside its tested range
At a college such as Spurgeon's College, which lies east of Norbury, checking penetration seals after summer M&E works is good practice.
Comparing quotes
- Whether their applicators hold CSCS cards
- Their public liability cover
- Their plan for phasing and protecting the area
- The terms of the workmanship guarantee
For managing agents and facilities managers
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Norbury. Several sites can go on one quote, which keeps the paperwork simple.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Norbury can form part of a wider programme.