Fire Stopping in Poling
Commercial sealant work in Poling for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Openings found when ceilings come down for a refit
- Fire-rated sealant that has cracked or shrunk back
- Expanding foam used as fire stopping
Fire stopping for businesses in Poling
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Compartment walls and floors in Poling
Poling has several hotels close by, all within 2 miles. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. Five care or nursing homes sit less than 2 miles from Poling. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail.
For a school such as The Littlehampton Academy, penetration sealing fits best at the end of the summer works. Industrial units on estates such as The Vinery Industrial Estate (less than half a mile north-east of Poling) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Poling is about 2 miles north of Littlehampton, in West Sussex. We cover commercial sites throughout Poling. Poling is one of 373 places we cover in West Sussex. Sites around Brighton have their own page, about 17 miles away.
Anyone looking for fire stopping in BN18 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Nearby places we also cover include Crossbush (1 mile north-west), Warningcamp (1 mile north-west), Toddington (1 mile south-west), Lyminster (2 miles west) and Rustington (2 miles south) for service penetrations. Nearby towns on our patch include Worthing (5 miles east), Bognor Regis (8 miles south-west), Chichester (12 miles west), Selsey (14 miles south-west), Shoreham-by-Sea (11 miles east) and Lancing (8 miles east).
Landmarks near Poling
The closest station to Poling is Arundel station, roughly 1.6 miles north-west of the centre. Nearby you’ll also find Rustington Museum (2 miles south) and Zachary Merton Hospital (2.1 miles south). For a walk, there’s Highdown Hill and WWT Arundel.
Fire stopping for commercial buildings in Poling
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind. We close the openings listed on your schedule, using the specified sealant and detail. If you’re dealing with fire-stopping items raised at inspection or handover and fire stopping installed outside its tested range, we can put it right, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, in Poling it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Rural conversions around Poling can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Poling (BN18)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Questions about Poling
Do you cover business parks and estates near Poling, such as The Vinery Industrial Estate?
Yes. We cover Poling and the area around it, including industrial estates, business parks and retail parks such as The Vinery Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
Will you work in a care home in Poling without moving residents out?
Yes. We work around residents’ routines, a room or two at a time. We follow the home’s own procedures throughout.
What does an EI 60 rating mean?
BS EN 1366-3 covers penetration seals and BS EN 1366-4 covers linear joints. Results are classified under BS EN 13501-2. The rating applies to the product as tested.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
When to call us in Poling
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it.
Most enquiries start with something like this:
- Seals that don’t match their tested detail
- Service penetrations left open after M&E works
- Penetration schedules that need working through
- Open linear gaps along the top of fire-resisting walls
Halls and meeting rooms at places like The Parish Church of St Nicholas sometimes gain new services, and any compartment wall crossed needs the specified seal.
Questions to ask before you book
- What site paperwork they can supply
- How they’ll work around occupants
- Whether primer will be used where the manufacturer specifies it
- How the existing material will be dealt with
More services for Poling
From enquiry to sign-off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. If others near Poling need work, visits can be combined. You’ll have a fixed quote before work starts.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Send your site hours and access windows
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.
Advice
What the job involves on each surface
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. We use the product and backing the detail names for that movement, with no gaps along the run.
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
What happens if it’s left?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail. Converted and older buildings near places like Poling tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why appoint us
- Products installed to the manufacturer’s instructions
- One number for every site we cover
- Failed material removed, not covered up
- Over 20 years of commercial sealing
See how commercial sealant jobs are priced and our accreditations.
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Brief every trade that openings they make must be sealed
- Have penetrations checked while they can still be seen
- Check risers and ceiling voids after each round of works
- File the specified details where the next contractor can find them
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, so check the product data first.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there.