Oxshott fire stopping
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Oxshott and the surrounding area. Send details for a fixed quote.
- Service penetrations left open after M&E works
- Unsealed penetrations discovered above suspended ceilings
- Non-fire-rated filler around services
Fire stopping in Oxshott
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Oxshott
No fire sealant works on its own: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in. If you have open linear gaps along the top of fire-resisting walls and seals that don’t match their tested detail, we can help. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Oxshott is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around Oxshott, penetration and linear seals tend to be one-building jobs. Send the specification, drawings or photos of the openings and we will quote to suit.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Oxshott (KT22, KT11, KT10)
- Wider area
- Surrey
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Work in places the size of Oxshott is planned as a single visit where we can. Clear photos and measurements help us bring the right products.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Point out parking and an unloading spot
- Let building users know which areas are affected
- Share the asbestos register for older buildings
Quotes
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or give us a call on 01277 525 020 or use the quote form to discuss it first.
Advice
FAQs: Oxshott
Can work at a site such as University for the Creative Arts fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Is a hospital such as Cobham Community Hospital and Health Centre somewhere you can work?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do you cover Oxshott?
Yes. We take on work across Oxshott, and the same phone number covers every area.
Can you quote from photos?
It depends on the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We will confirm the products and details used.
Do you design or specify fire stopping?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is installing what they specify, to the product’s tested detail.
Quoting for work in Oxshott
Your fixed quote is built from the real scope. It takes account of:
- The size and state of each joint
- Which sealant the job calls for
- Travel to remote or island sites
- Whether old sealant has to be cut out first
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Whether the building will be occupied during the work
- Specification clauses that apply
- The site address and postcode
- Any dates the work must fit around
For a fixed quote, give us a call on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
Where services cross fire walls in Oxshott
At about 16 miles from central London, Oxshott is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls. Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Hotels such as Woodlands Park Hotel (to the south of Oxshott) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. Older community buildings such as St Andrew's Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Oxshott is about 3 miles north-west of Leatherhead, in Surrey. Looking for fire stopping in Oxshott? We can help, as we do across Surrey. 379 places across Surrey fall within our area, Oxshott among them. Our London page has more on work in that area.
Commercial sites across KT22, KT11 and KT10 are covered. For a building on High Street, Oakshade Road and Silverdale Avenue or nearby, send details and we’ll quote for service penetrations. Just outside Oxshott, we also work in Pachesham Park (1 mile south-east), Stoke D'Abernon (1 mile south-west), Malden Rushett (2 miles east), Cobham (2 miles west) and Claygate (2 miles north-east). Nearby towns on our patch include Guildford (11 miles south-west), Woking (9 miles west), Epsom (4 miles east), Horley (13 miles south-east), Redhill (10 miles south-east) and Ewell (5 miles east).
Near you in Oxshott
We work on buildings around Therfield School, Danes Hill School and Claygate Common and the streets around them. There’s a railway station in Oxshott itself: Oxshott station. Well-known places in the area include Elmbridge Museum (2.6 miles north) and The Ashley Centre (3.8 miles east). Not far away are Jubilee Wood and Claremont Lake.
Also in Oxshott
For managing agents and facilities managers
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Oxshott can form part of a wider programme across Surrey.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Why act early in Oxshott
The longer openings stay, the more there tend to be: each new service adds to the list. A schedule that is dealt with regularly stays manageable and avoids a much larger catch-up later. Sealant hardens, cracks and loses grip with age, UV and movement. Replacing it before it fails keeps water out.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why clients in Oxshott choose us
- One contact handling all your sites
- Old sealant cut out, never sealed over
- Work carried out by CSCS-carded applicators
- Constructionline member
Read how commercial sealant jobs are priced and our accreditations.
Do you need fire stopping in Oxshott?
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint, and the wrong product can split as a result. The tested detail for a linear joint states the width and movement it covers.
It’s worth sending us details if you spot any of the following:
- Fire sealant pulled out of the opening
- Snag lists that include open service penetrations
- Head-of-wall gaps with no fire seal
- Fire stopping installed outside its tested range
Residences at universities like University for the Creative Arts, 4 miles to the east of Oxshott, have compartment walls that must be resealed whenever services change.
Before you book anyone
- How they handle RAMS and site documents
- Whether old or failed sealant will be cut out, not overlaid
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Who will actually carry out the work
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.