
Old Hawkinge fire stopping
Fire stopping in Old Hawkinge, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Service penetrations left open after M&E works
- Snag lists that include open service penetrations
- Fire seals cut back for extra cables and never reinstated
Fire stopping across Old Hawkinge
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Old Hawkinge, done properly
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on sites in Old Hawkinge. If you have unsealed penetrations discovered above suspended ceilings and open linear gaps along the top of fire-resisting walls, we can put it right, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Old Hawkinge is the same: the right product in a properly prepared joint.
Smaller places such as Old Hawkinge still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.

- Location
- Old Hawkinge (CT18)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Keep the joints in good shape with a few simple steps:
- Don’t let anyone top up a fire seal with the wrong product
- Agree the fire-stopping specification before services go in
- Leave fire sealant to cure fully before covering it
- Check risers and ceiling voids after each round of works
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job; found late, it can be one of many.
Do you need fire stopping in Old Hawkinge?
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls and later need putting right.
Things that usually lead to an enquiry:
- Non-fire-rated filler around services
- Service penetrations left open after M&E works
- Damaged fire seals in risers and voids
- Old intumescent sealant that has split away
Shop fits on retail sites such as West Park Farm North Retail Park (to the south-west of Old Hawkinge) can bring new services through fire-resisting walls between units, to be sealed with the specified product.
What your quote should include
- How the existing material will be dealt with
- Will CSCS-carded applicators be on site?
- The named product and why it was chosen
- How the joint faces will be prepared and primed
Common questions from Old Hawkinge clients
Do you take on work at healthcare sites like Royal Victoria Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you work at a site such as West Park Farm North Retail Park, by Old Hawkinge?
Yes. Estates, retail parks and business parks around Old Hawkinge, West Park Farm North Retail Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
What does an EI 60 rating mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Classification follows BS EN 13501-2 as E for integrity and I for insulation, with a time such as EI 60 or EI 120. The rating applies to the product as tested.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
What changes on 2 September 2029?
In England, references to the older BS 476 national classes are being removed from Approved Document B from 2 September 2029, with transitional arrangements set by the Government. The European route, BS EN 13501-2, then applies. Your designer will choose products with the right evidence.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Why it’s worth doing now in Old Hawkinge
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. One visit to deal with every failing joint makes more sense than several trips to a place like Old Hawkinge, rather than one at a time. Photos of every joint help us quote for the whole job.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why choose Mastic Doctor in Old Hawkinge
- CSCS-carded applicators
- Sealing commercial buildings since 2005
- Workmanship guaranteed for 12 months
- Fixed quotes based on photographs, drawings or a visit
Read what affects the cost or our accreditations.
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For a building around Old Hawkinge, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Point out any areas we must not close
- Arrange parking or a loading space
- For older buildings, check the asbestos register before work
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Read more
Fire stopping around Old Hawkinge: how the place shapes the job
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail. Central London is about 61 miles from Old Hawkinge. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product.
In a building such as Church of St Michael, any service penetration through a fire-resisting wall should be sealed to the specified detail. At a college such as Folkestone College, 2.4 miles to the south of Old Hawkinge, checking penetration seals after summer M&E works is good practice.
Old Hawkinge is about 1 mile east of Hawkinge, in Kent. We cover Old Hawkinge, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, including Old Hawkinge. Sites around Brighton have their own page, roughly 60 miles from Old Hawkinge.
Anyone looking for fire stopping in CT18 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Standen Lane and Church Hill. Just outside Old Hawkinge, we also work in Hawkinge (1 mile west), Densole (2 miles north-west), Swingfield Minnis (2 miles north), Arpinge (2 miles west) and Selsted (3 miles north). Further afield, our area takes in Ashford (14 miles west), Canterbury (12 miles north), Dover (5 miles east), Deal (11 miles north-east), Hythe (5 miles south-west) and Tower Hamlets (5 miles east).
Near you in Old Hawkinge
Recent enquiries here include premises near East Cliff and Warren Country Park and White Horse pub and the streets around them. Old Hawkinge’s nearest station is Folkestone Central station, about 2.3 miles south of the centre. Nearby you’ll also find Folkestone Castle (1.6 miles south-west) and Royal Victoria Hospital (2.1 miles south). The countryside around Old Hawkinge includes Sugar Loaf Hill.
Also in Old Hawkinge
What the job involves on each surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter.
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.