Fire stopping in Old Deer
Fire stopping for Old Deer, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Fire-stopping items raised at inspection or handover
- Service penetrations left open after M&E works
- Fire-rated sealant that has cracked or shrunk back
Fire stopping across Old Deer
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Old Deer
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, ring 01277 525 020 or email drawings and photos with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. We work on service gaps in risers, small duct penetrations where the tested detail allows and pipe penetrations, and the usual reasons a site gets in touch are snag lists that include open service penetrations and unsealed joints where partitions meet the slab. One point of contact handles commercial sealant work in Old Deer from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Hotels and care homes around smaller places like Old Deer often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- Old Deer (AB42)
- Region
- Aberdeenshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Larger or fire-rated ductwork normally needs a different solution set by the designer, and we will say if that applies.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range.
Common questions from Old Deer clients
Is Old Deer off your patch?
No. Small places get the same service as large ones. We cover the whole of Scotland. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
What do Scotland’s building standards say about service penetrations in Old Deer?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you handle several sites?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we will send them with the quote.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
Diagnose, treat, sign off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. For a building near Old Deer, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Move anything stored against the joints
- Let us know about inductions and permits
- Share the asbestos register for older buildings
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Advice
What sealant work can’t fix
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Deciding what a wall or floor needs, which belongs to the designer
- Large openings beyond what any sealant detail covers
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just speak to us on 01277 525 020 or use the quote form and we will give you a straight answer before you book.
Surfaces we seal
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
Fire stopping in Old Deer: the local picture
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. We install what’s specified, to the product’s tested detail.
For a hotel such as Saplinbrae House Hotel, 0.5 miles north-west of Old Deer, penetration seals are worth checking after any refit or services upgrade. At a healthcare site like Maud Hospital (3.2 miles west of Old Deer), new services through compartment walls are a constant, and each needs the specified seal. Holiday works at schools like Mintlaw Academy often leave service openings to seal before pupils return.
Old Deer is about 9 miles west of Peterhead, in Aberdeenshire. Old Deer sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Old Deer is one of 179 places in Aberdeenshire on our list for service penetrations. For work in that direction, see our Aberdeen page.
Business premises anywhere in AB42 are within our area for service penetrations. We cover commercial and managed buildings on Abbey Street, Abbey View and Kirkgate and the roads nearby. Close to Old Deer, our area also takes in Stuartfield (1 mile south), Mintlaw (1 mile east), Fetterangus (2 miles north), Maud (3 miles west) and Longside (4 miles east). Nearby towns on our patch include Peterhead (9 miles east), Fraserburgh (11 miles north), Ellon (10 miles south), Roanheads (10 miles east), Clerkhill (9 miles east) and Port Henry (10 miles east).
Landmarks near Old Deer
Around Old Deer, our work takes us to commercial buildings near Aden Country Park and the streets around them. Nearby you’ll also find Maud Hospital (3.2 miles west) and Aberdeenshire Farming Museum (less than half a mile north-east). Open spaces near Old Deer include Skelmuir Hill and Pitfour Lake.
Also near Old Deer
Also in Old Deer
Leave it or put it right?
An unsealed opening affects more than fire safety: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Old Deer, a repair visit takes planning, so it’s better to act early.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why us?
- Commercial sealant work since 2005
- CSCS-carded applicators
- Fully insured
- Health and safety: CHAS accredited
See our cost guide and our accreditations.
Should maintenance staff do it?
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
After the work
For the best life from the joints:
- Get seals inspected before ceilings and boxing close
- Check risers and ceiling voids after each round of works
- File the specified details where the next contractor can find them
- Keep general-purpose fillers away from compartment walls
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.