Fire-rated sealing and fire stopping in Nutbourne, West Sussex
Fire-rated and intumescent sealing of service penetrations and linear gaps across Nutbourne, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Builders’ foam or ordinary silicone in compartment walls
- Openings left by services added after handover
- Unsealed joints where partitions meet the slab
Fire stopping for businesses in Nutbourne
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
From enquiry to sign-off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. Smaller jobs around Nutbourne can be grouped with others nearby, which keeps travel down. You’ll have a fixed quote before work starts.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Send your site hours and access windows
- Send any specification or drawings in advance
- Agree which areas must stay open
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or email us to discuss it first.
Read more
How we handle fire stopping in Nutbourne
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. Most enquiries involve head-of-wall gaps with no fire seal and damaged fire seals in risers and voids, across cable penetrations, pipe penetrations and service gaps in risers. For commercial sealant work in Nutbourne, you deal with one contact from quote to sign-off, whether it’s one building or several.
Around smaller places like Nutbourne, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
A 12-month guarantee applies to all our work in West Sussex. Should something we installed fail, phone 01277 525 020 or email a schedule or drawings and we’ll come back to it.
- Place
- Nutbourne (PO18, PO10)
- Region
- West Sussex
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Questions about Nutbourne
Could you schedule work at a campus like University of Chichester for the vacation?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
How does the move away from BS 476 affect penetration seals in Nutbourne?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Do you work in Nutbourne?
Yes. Sites across Nutbourne are covered, with one number for every area we cover.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Site staff or a sealant specialist?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Work for main contractors and building owners
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Nutbourne can sit alongside others in a wider programme.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Travel to remote or island sites
- Removal of failed or old sealant
- Induction, permit and paperwork requirements
- The total length or number of joints
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
Before you send an enquiry
A few photos plus some basic facts will normally do. Please tell us:
- Access details, including height
- Specification clauses that apply
- Asbestos survey details if the building is older
- Clear photos of the problem areas
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Service penetrations in Nutbourne buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. At about 57 miles from central London, Nutbourne is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
In a hotel such as Millstream Hotel, 1.4 miles to the south-east of Nutbourne, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. For a hospital such as Havant War Memorial Hospital, which lies west of Nutbourne, penetration sealing is typically phased ward by ward, with infection-control rules agreed first. In a building such as St Wilfrid's Church and Hall, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Nutbourne is about 5 miles west of Chichester, in West Sussex. Any commercial site in Nutbourne is covered, whether it’s a single job or part of a planned programme. Our West Sussex coverage takes in 373 places. Portsmouth is covered too, around 9 miles from Nutbourne.
Commercial sites across PO18 and PO10 are covered for service penetrations. Buildings on Flatt Road, Pottery Lane and Main Road are within our area. Nearby places we also cover include Hambrook (1 mile north), Chidham (1 mile south-east), Bosham (2 miles south-east), Broadbridge (2 miles east) and West Ashling (2 miles north-east) for service penetrations. A short drive away, we cover Bognor Regis (9 miles south-east), Chichester (5 miles east), Selsey (9 miles south-east), Portfield (5 miles east), Yapton (12 miles east) and East Wittering (5 miles south).
Landmarks near Nutbourne
In Nutbourne, that means premises near Eames Farm and Bourne Community College, among other places. Nutbourne has its own railway station: Nutbourne station. Nearby you’ll also find Warblington Castle (3.6 miles west) and Emsworth Museum (2.4 miles west). The countryside around Nutbourne includes Nutborne Marshes and Stoke Down.
What the job involves on each surface
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance along with any permits your site needs.
Metal pipes
Heat travels along metal pipework. If the detail needs something beyond sealant, we tell you.
Also near Nutbourne
Also in Nutbourne
When something else is needed
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Reviewing a building’s overall fire safety
- Openings that need collars, wraps, batts or boards rather than sealant
- Construction that lacks the fire resistance the seal relies on
If you’re not sure, just speak to us on 01277 525 020 or send photos by email and we will give you a straight answer.
Where we work in Nutbourne
- Pipe penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers