Fire-rated sealing and fire stopping in Yapton, West Sussex
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Yapton and the surrounding area. Send details for a fixed quote.
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
- Head-of-wall gaps with no fire seal
Fire stopping for Yapton sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Fire stopping in Yapton
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. Site teams most often ask us about unsealed joints where partitions meet the slab and hidden openings found during inspections, across pipe penetrations, linear gaps at wall heads and service gaps in risers. Facilities teams, main contractors and managing agents in Yapton tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Buildings in a smaller place such as Yapton that need fire-rated sealing are typically schools, care homes, surgeries, small offices and flats over shops. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Place
- Yapton (BN18)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to Yapton
Also in Yapton
Surface by surface
Risers and ceiling voids
Voids hide a lot of unsealed openings. We work through the areas on your schedule methodically.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement, along the full length of the run.
When something else is needed
We check first that sealant really is the fix. It won’t put right:
- Approving the work on behalf of building control
- Openings that need collars, wraps, batts or boards rather than sealant
- Fire doors, dampers or other fire safety equipment
Not sure which it is? You can phone 01277 525 020 or email us and we will tell you honestly before you book.
Surfaces we seal
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
Why deal with it now?
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. A failed joint lets water into a building whatever its size. Early resealing avoids the damage that follows a leak.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- Specification-led, product-correct work
- Failed material removed, not covered up
- Clear, fixed quotes
- Constructionline member
See how commercial sealant jobs are priced or our accreditations and insurance.
Signs you need fire stopping in Yapton
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
Look out for the following:
- Old intumescent sealant that has split away
- Improvised or mixed-product fire seals
- Seals disturbed by maintenance and left open
- Expanding foam used as fire stopping
Campus buildings at universities such as University of Chichester (Bognor Campus) (3 miles south-west of Yapton) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified.
Comparing quotes
- The named product and why it was chosen
- Do they follow the manufacturer’s priming guidance?
- Their pre-qualification and accreditations
- Will RAMS and insurance details be available?
Questions about Yapton
What happens to BS 476 references for fire stopping in Yapton?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Can you work around term dates at a campus such as University of Chichester (Bognor Campus)?
Yes. We plan campus work around teaching, exams and residence turnarounds. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Are you insured?
Yes. We are fully insured, including public liability cover.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators.
Where services cross fire walls in Yapton
Several hotels sit less than 2 miles from Yapton. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. Yapton is about 52 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
Offices at parks like Orchard Business Park. (to the north of Yapton) are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail. Theatres, wards and plant rooms at sites like Arundel and District Hospital (to the north-east of Yapton) all have compartment walls crossed by services.
Yapton is about 4 miles north-east of Bognor Regis, in West Sussex. We send applicators to Yapton for service penetrations. Yapton is one of 373 places in West Sussex on our list. We also cover Portsmouth, some 20 miles away.
Anyone looking for fire stopping in BN18 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Church Road, Dunnock Square and Charles Square are within our area for service penetrations. You will find Yapton on or near the B2132, so getting applicators and materials to site is simple. Sites close to Yapton are covered too, including Bilsham (1 mile south), Barnham (1 mile north-west), Flansham (2 miles south-west), West Barnham (2 miles north-west) and Walberton (2 miles north). Further afield, our area takes in Worthing (9 miles east), Bognor Regis (4 miles south-west), Chichester (7 miles west), Selsey (10 miles south-west), Littlehampton (4 miles east) and Shoreham-by-Sea (15 miles east).
What’s near Yapton
In Yapton, that means premises near St Philip Howard Catholic High School. For rail, the closest station is Barnham station, roughly 1.5 miles north-west. Other landmarks nearby include Bognor Regis Museum (3.9 miles south-west) and Arundel and District Hospital (3.2 miles north-east). Open spaces near Yapton include WWT Arundel.
On site: what to expect
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. What matters most for a job in Yapton is a clear list of what needs doing, so send photos of each area. You’ll then get a fixed price for the work.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Arrange parking or a loading space
- Make sure the joints can be reached
- Have the specification and drawings to hand
Quotes
To get a fixed quote, speak to us on 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. Our quote form is another easy route.