
Fire stopping in Broadbridge
Looking for fire stopping in Broadbridge? It’s simple: send details, get a quote, we seal, guaranteed.
- Seals disturbed by maintenance and left open
- Head-of-wall gaps with no fire seal
- Service penetrations left open after M&E works
Fire stopping near Broadbridge
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Leave it or put it right?
An unsealed opening affects more than fire safety: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. One visit to deal with every failing joint makes more sense than several trips to a place like Broadbridge, rather than one at a time. Send photographs of each area and we’ll quote for the lot.
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why choose Mastic Doctor in Broadbridge
- 12-month guarantee on workmanship
- Products installed to the manufacturer’s instructions
- Commercial sealant work since 2005
- One number for every site we cover
See how commercial sealant jobs are priced and our accreditations.
Fire stopping for commercial buildings in Broadbridge
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you have openings found when ceilings come down for a refit and fire stopping installed outside its tested range, we can help. Most enquiries from Broadbridge start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Rural conversions around Broadbridge can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Our workmanship is guaranteed for 12 months, in Broadbridge as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Broadbridge (PO18)
- Region
- West Sussex
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026

Common problems we fix in Broadbridge
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls and later need putting right.
What tends to prompt an enquiry:
- Old intumescent sealant that has split away
- Damaged fire seals in risers and voids
- Penetration schedules that need working through
- Improvised or mixed-product fire seals
At a university such as University of Chichester, 3.2 miles to the east of Broadbridge, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Before you book anyone
- Their pre-qualification and accreditations
- Proof of insurance
- How joint depth will be controlled
- Can the work be phased to keep areas open?
When it isn’t the sealant
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Deciding what a wall or floor needs, which belongs to the designer
- Large openings beyond what any sealant detail covers
- Walls or floors that aren’t fire-resisting to begin with
Not sure which it is? You can call 01277 525 020 or email the details over and we will tell you honestly.
Surfaces we seal
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
Should maintenance staff do it?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
FAQs: Broadbridge
Is a smaller place like Broadbridge outside your area?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
What happens to BS 476 references for fire stopping in Broadbridge?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Can staff carry on working while you’re here?
In most cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Is the work guaranteed?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Places near Broadbridge
What else we do in Broadbridge
Compartment walls and floors in Broadbridge
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Broadbridge has a number of hotels close by, all within 2 miles. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Offices at parks like Broadbridge Business Centre, under half a mile to the west of Broadbridge, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail. Large healthcare estates like Nuffield Health Chichester Hospital (2.9 miles east of Broadbridge) change their services often, so penetration seals are worth checking after M&E work.
Broadbridge is about 3 miles west of Chichester, in West Sussex. Businesses, contractors and managing agents in Broadbridge can call on us for service penetrations, as part of our coverage of West Sussex. Across West Sussex, 373 places are covered, Broadbridge among them. We also cover Portsmouth, around 10 miles from Broadbridge.
Commercial sites across PO18 are covered. Buildings on Station Road, Gifford Road and North Road are within our area for service penetrations. Sites close to Broadbridge are covered too, including Bosham (1 mile south-west), West Ashling (1 mile north), Chidham (1 mile west), East Ashling (2 miles north) and Fishbourne (2 miles east). A short drive away, we cover Bognor Regis (8 miles south-east), Chichester (3 miles east), Selsey (8 miles south), Littlehampton (14 miles east), Rustington (15 miles east) and Portfield (4 miles east).
Around Broadbridge
In Broadbridge, that means premises near Bishop Luffa School and The White Swan Public House, among other places. There’s a railway station in Broadbridge itself: Bosham station. Well-known places in the area include Novium Museum (2.9 miles east) and Chichester Castle (3.1 miles east). Not far away are Nutborne Marshes and Stoke Down.
Different surfaces, different methods
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.
Drylining partitions
Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers before sealing.
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Rural sites near Broadbridge may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Getting the site ready
- Share the asbestos register for older buildings
- Move anything stored against the joints
- Confirm the product named in the specification
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.