New Haw fire stopping
Need fire stopping in New Haw? It’s simple: send details, get a quote, we seal, guaranteed.
- Fire-stopping items raised at inspection or handover
- Fire stopping installed outside its tested range
- Unsealed penetrations discovered above suspended ceilings
Fire stopping across New Haw
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in New Haw
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. What we bring is careful installation of the specified sealant, to the maker’s guidance. We work on service gaps in risers, linear gaps at wall heads and cable penetrations, and what we are called in for most is fire seals cut back for extra cables and never reinstated and penetration schedules that need working through. Whoever orders the work in New Haw, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
Buildings in a smaller place such as New Haw that need fire-rated sealing are typically schools, care homes, surgeries, small offices and flats over shops. Specified fire-rated sealant goes around new services there, built to match the manufacturer’s detail.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- New Haw (KT15)
- Wider area
- Surrey
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Openings that need collars, wraps, batts or boards rather than sealant
- Deciding what a wall or floor needs, which belongs to the designer
- Issuing fire ratings or certificates for seals
If you’re not sure, just give us a call on 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Where we work in New Haw
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
Nearby places to New Haw
What else we do in New Haw
What the job involves on each surface
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Larger or fire-rated ductwork typically needs a different solution set by the designer and we flag that rather than guess.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. Each gap is measured where it is widest against the detail’s limits, and any outside it are raised with you.
Common questions from New Haw clients
Is New Haw off your patch?
No. Places such as New Haw are covered as much as the big towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is Camphill Industrial Estate, near New Haw, within your area?
Yes. Estates, retail parks and business parks around New Haw, Camphill Industrial Estate among them, are all within reach. To start, just speak to us on 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What do BS EN 1366-3 and BS EN 13501-2 mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Results are classified under BS EN 13501-2, where E is integrity, I is insulation and the number is minutes, as in EI 60. The rating applies to the product as tested.
Can you reseal penetrations after our M&E works?
Yes, where there is a specification for those walls and floors. Openings left by new services are among the most common jobs we see, and we reseal them to the specified detail.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
What will the job cost?
Each job is quoted on its own details. For yours, phone 01277 525 020 or email drawings and photos.
Compartment walls and floors in New Haw
New Haw is about 20 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls. Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
For a hotel such as Brooklands Hotel, 1 mile to the east of New Haw, penetration seals are worth checking after any refit or services upgrade. For a unit at a site such as Camphill Industrial Estate, 0.6 miles south of New Haw, new power or data runs between office and warehouse can breach a compartment wall. Colleges such as Brooklands Technical College - Weybridge Campus, 1.5 miles north-east of New Haw, add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
New Haw is about 2 miles south-west of Weybridge, in Surrey. We cover New Haw, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. New Haw is one of 379 places we cover in Surrey for service penetrations. Sites around London have their own page, roughly 20 miles from New Haw.
We take on service penetrations across the KT15 postcode area, for business premises of every kind. Streets here include Hawthorn Way, Woodham Lane and Mayfield Avenue. Main routes into New Haw include the A318 and B385, useful when we plan access and materials. Close to New Haw, our area also takes in Byfleet (1 mile south-east), Brooklands (1 mile east), Addlestone (1 mile north), Wisley (2 miles south) and St George's Hill (2 miles east). Further afield, our area takes in Guildford (8 miles south-west), Woking (4 miles south-west), Camberley (10 miles west), Epsom (10 miles east), Ewell (10 miles east) and Egham (6 miles north-west).
Near you in New Haw
In New Haw, that means premises near Manor Farm, Fullbrook School and The Station pub, among other places. The nearest railway station is Byfleet & New Haw station, roughly 0.6 miles east. Other landmarks nearby include The Hockey Museum (3.6 miles south-west) and Runnymede Hospital (2.3 miles north-west). Not far away are Papercourt Marshes and Ferris Meadow Lake.
Why it’s worth doing now in New Haw
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these. For buildings in places like New Haw, one well-planned visit beats several small ones, so we’d suggest renewing all the joints that are going, not just the worst.
Pricing service penetrations depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Why clients in New Haw choose us
- CSCS-carded applicators
- 12 months’ guarantee on every job
- Work to your specification and the manufacturer’s guidance
- A Constructionline member, so easy to vet
See how commercial sealant jobs are priced and how we’re accredited.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Quoting for work in New Haw
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- Joint width, depth and condition
- Distance, for remote addresses
- The product specified
- Whether the work must be split into stages
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Before you send an enquiry
We can often quote from photos and a few details. Please tell us:
- The product your specification calls for
- Rough lengths or quantities, or drawings if you have them
- The asbestos register, for older buildings
- Where the site is, with the postcode
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or email us.
Diagnose, treat, sign off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. Work in places the size of New Haw is planned as a single visit where we can. Clear photographs and measurements help us bring the right products.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we’ll be in
- Make sure the joints can be reached
Get a fixed quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.