Fire stopping in Mosstodloch
Planning work on a service penetration in Mosstodloch? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Openings found when ceilings come down for a refit
- Non-fire-rated filler around services
- Unsealed openings around new pipes and cables
Fire stopping near Mosstodloch
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
How we handle fire stopping in Mosstodloch
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, and they are easy to forget. Those on your schedule are closed with the specified product. Most enquiries involve unsealed openings around new pipes and cables and builders’ foam or ordinary silicone in compartment walls, on service gaps in risers, linear gaps at wall heads and joints between fire-resisting walls and floors. Facilities teams, main contractors and managing agents in Mosstodloch tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Travel to smaller places like Mosstodloch is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Mosstodloch (IV32)
- Region
- Moray
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Travel to smaller Scottish places like Mosstodloch is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Arrange parking or a loading space
- Tell staff and tenants when we will be in
- Let us know about inductions and permits
Quotes
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Related advice
Fire stopping in Mosstodloch: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
In a school such as Milne's High School, fire-rated sealant goes in around service penetrations where it is specified. On a hospital site such as Seafield Hospital, 5.9 miles to the north-east of Mosstodloch, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Mosstodloch is about 7 miles south-west of Buckie, in Moray. Commercial clients in Mosstodloch can call on us for service penetrations. Mosstodloch is one of 59 places we cover in Moray for service penetrations. Aberdeen is covered too, some 49 miles away.
Commercial sites across IV32 are covered for service penetrations. Buildings on Mossmill Park, Stynie Road and Findlay Road are within our area. Close to Mosstodloch, our area also takes in Fochabers (1 mile south-east), Bogmoor (2 miles north-east), Upper Dallachy (2 miles north-east), Garmouth (3 miles north) and Nether Dallachy (3 miles north-east). Bigger towns within reach include Elgin (7 miles west), Buckie (7 miles north-east), Lossiemouth (9 miles north-west), Keith (8 miles south-east), Ashgrove (7 miles west) and Portknockie (11 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
What’s near Mosstodloch
Well-known places in the area include Gordon Castle (1.2 miles east) and Fochabers Folk Museum (1.2 miles south-east). Green spaces nearby include The Lake and Findlay's Seat.
Also near Mosstodloch
More services for Mosstodloch
Questions about Mosstodloch
What do Scotland’s building standards say about service penetrations in Mosstodloch?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Is a smaller place like Mosstodloch outside your area?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Who decides which product is used?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can the building stay open while you work?
Usually, yes. We phase the work so most of the building stays in use.
Can you quote from photographs?
That depends on the size and complexity of the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
How do I request a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Common problems we fix in Mosstodloch
Some service penetrations were never sealed at all, often hidden above suspended ceilings or behind boxing. Inspections, refurbishments and ceiling access normally bring them to light.
These are often picked up first by site or facilities staff:
- Hidden openings found during inspections
- Seals disturbed by maintenance and left open
- Unsealed joints where partitions meet the slab
- Penetration schedules that need working through
For a hotel such as Gordon Arms Hotel, 1 mile to the south-east of Mosstodloch, penetration seals are worth checking after any refit or services upgrade.
Questions to ask before you book
- Will CSCS-carded applicators be on site?
- Is the sealant right for the movement and the substrate?
- The terms of the workmanship guarantee
- How they handle RAMS and site documents
Maintenance after handover
To get the most from the new sealant:
- Flag new cables with no seal around them
- Ask the designer to confirm details early on refits
- Don’t let anyone top up a fire seal with the wrong product
- File the specified details where the next contractor can find them
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
What we can’t put right
Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is one of these:
- Writing the fire-stopping specification
- Walls or floors that aren’t fire-resisting to begin with
- Fire doors, dampers or other fire safety equipment
Not sure which it is? You can call 01277 525 020 or email a schedule or drawings and we will tell you honestly.
Joints and surfaces we work on
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Mosstodloch can sit alongside others in a wider programme across Moray.