Fire Stopping in Keith
Planning work on a service penetration in Keith? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Seals that don’t match their tested detail
- Snag lists that include open service penetrations
- Unsealed openings around new pipes and cables
Fire stopping in Keith
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is one of these:
- Fire risk assessments, a job for a competent assessor
- Approving the work on behalf of building control
- Writing the fire-stopping specification
If in doubt, give us a call on 01277 525 020 or use the quote form and we will say what we think before you book.
What we seal
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Service gaps in risers
How we handle fire stopping in Keith
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, phone 01277 525 020 or email us with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. Site teams most often ask us about fire sealant pulled out of the opening and penetration schedules that need working through, on cable penetrations, joints between fire-resisting walls and floors and linear gaps at wall heads. Most enquiries from Keith start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Refurbishments in small hotels, schools and care homes around places like Keith can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Keith (AB55)
- Wider area
- Moray
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
When to bring in a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Put resealing into every M&E and fit-out package
- Report damaged or disturbed seals as soon as they’re spotted
- Check risers and ceiling voids after each round of works
- Agree the fire-stopping specification before services go in
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs near Keith are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Tell staff and tenants when we will be in
- Have the specification and drawings to hand
- Share the asbestos register for older buildings
Request a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Related advice
Where services cross fire walls in Keith
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified. Several hotels sit less than 2 miles from Keith. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Hotels like Ugie House Hotel, under half a mile to the north-east of Keith, are refurbished in phases, and each phase can open up compartment walls. Theatres, wards and plant rooms at sites like Turner Memorial Hospital, less than half a mile to the west of Keith, all have compartment walls crossed by services. Older community buildings such as St Rufus Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Keith is about 9 miles south of Buckie, in Moray. We cover commercial sites throughout Keith, for single jobs and planned programmes alike. Keith is one of 59 places in Moray on our list for service penetrations. We also cover Aberdeen, around 41 miles from Keith.
Business premises anywhere in AB55 are within our area. For a building on Church Road, Station Road and Turner Street or nearby, send details and we will quote for service penetrations. Being close to the A95 and A96, Keith is straightforward for us to reach. Nearby places we also cover include Newmill (1 mile north), Drummuir (5 miles south-west), Cairnie (5 miles south-east), Ruthven (5 miles south-east) and Fochabers (7 miles north-west) for service penetrations. A short drive away, we cover Elgin (15 miles north-west), Buckie (9 miles north), Ashgrove (15 miles north-west), Portknockie (12 miles north), Cullen (11 miles north-east) and Findochty (11 miles north). As one of the bigger centres in Moray, Keith has a broad mix of commercial, public and industrial buildings. Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
Near you in Keith
Recent enquiries here include premises near Seafield Arms Hotel, among other places. For rail, the closest station is Keith station, about 0.6 miles north. Nearby you will also find Turner Memorial Hospital (under half a mile north-west) and Pitlurg Castle (3.1 miles south). Open spaces near Keith include The Balloch.
Keith: questions and answers
How do Scotland’s building standards affect fire-rated sealant in Keith?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do you take on work at healthcare sites like Turner Memorial Hospital?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Is the work guaranteed?
Yes. Workmanship is guaranteed for 12 months.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Quoting for work in Keith
To price the job, we consider:
- Specialist products, such as fire-rated or hygienic sealants
- Whether old sealant has to be cut out first
- The size and state of each joint
- Location, for remote and island sites
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Details that help us quote
A good diagnosis starts with the right details. Let us know:
- The site address and postcode
- A wide shot and a close-up of the area
- Rough lengths or quantities, or drawings if you have them
- Asbestos survey details if the building is older
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
More services for Keith
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Keith can form part of a wider programme.