Fire-rated sealing and fire stopping in Mid Holmwood, Surrey
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Mid Holmwood. Send photos or drawings for a fixed quote.
- Fire seals cut back for extra cables and never reinstated
- Fire stopping installed outside its tested range
- Penetration schedules that need working through
Fire stopping in Mid Holmwood
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Mid Holmwood
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. If you are dealing with fire seals cut back for extra cables and never reinstated and unsealed joints where partitions meet the slab, we can put it right. Facilities teams, main contractors and managing agents in Mid Holmwood tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For a smaller site near Mid Holmwood, we plan to do all the penetrations in one go, with the specification and photographs sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
A 12-month guarantee applies to all our work. Should something we installed fail, call the office on 01277 525 020 or email us and we’ll come back to it.
- Location
- Mid Holmwood (RH5)
- Region
- Surrey
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Owners, agents and contractors
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
General trades versus a specialist
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Leave it or put it right?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme. For buildings around smaller places like Mid Holmwood, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
What you get with us
- Workmanship guaranteed for 12 months
- Health and safety: CHAS accredited
- A Constructionline member, so easy to vet
- Our applicators hold CSCS cards
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Gaps in walls that were never built as compartment walls
- Approving the work on behalf of building control
- Writing the fire-stopping specification
Not sure which it is? You can call 01277 525 020 or email the details over and we will tell you honestly.
Joints and surfaces we work on
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. For a building around Mid Holmwood, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Send any specification or drawings in advance
- Tell staff and tenants when we’ll be in
- Clear stock, furniture or equipment away from the joints
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Related advice
Places near Mid Holmwood
Other services in Mid Holmwood
Questions we are asked in Mid Holmwood
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Mid Holmwood?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Can you seal around new services in a hotel near Mid Holmwood?
Yes, where fire-rated sealant is the specified product. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
After the work
For the best life from the joints:
- Look above ceilings when tiles are lifted for other jobs
- Record which product was used where
- Settle who seals which penetrations at the start of a project
- Brief every trade that openings they make must be sealed
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there, not months later.
Compartment walls and floors in Mid Holmwood
Central London is about 23 miles from Mid Holmwood. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal. The area within 2 miles of Mid Holmwood holds a number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Tenant changes at parks like Glebelands Centre Business Park, 1.9 miles to the north of Mid Holmwood, bring new data and services, and openings through fire-resisting walls need the specified seal. For a school such as St John's Church of England Primary School, penetration sealing fits best at the end of the summer works. Wherever services are added at a hospital such as Dorking Community Hospital, 1.6 miles north of Mid Holmwood, the compartment line has to be made good with the specified product.
Mid Holmwood is about 2 miles south of Dorking, in Surrey. We send applicators to Mid Holmwood for service penetrations, handled exactly as we handle every other area. We work across 379 places in Surrey, from busy centres to rural villages. There’s a separate page for London, roughly 23 miles from Mid Holmwood.
Anyone looking for fire stopping in RH5 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. For a building on Horsham Road, Swallow Lane and Mid Holmwood Lane or nearby, send details and we will quote for service penetrations. Nearby places we also cover include North Holmwood (1 mile north-east), Blackbrook (1 mile north-east), Dorking (2 miles north), Westcott (2 miles north-west) and Wotton (3 miles west) for service penetrations. A short drive away, we cover Guildford (11 miles west), Woking (13 miles north-west), Epsom (10 miles north), Horley (7 miles east), Redhill (7 miles east) and Ewell (11 miles north).
Local landmarks in Mid Holmwood
Locally, jobs take us to sites close to Inholms Clay Pit, The Priory CofE Voluntary Aided School and The Norfolk Arms, among other places. For rail, the closest station is Holmwood station, roughly 1.6 miles south. Nearby you’ll also find Betchworth Castle (2.7 miles north-east) and Mesolithic Museum (3.4 miles west). Not far away are Vann Lake and Leith Hill.