Melness fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Melness, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Improvised or mixed-product fire seals
- Head-of-wall gaps with no fire seal
- Non-fire-rated filler around services
Need fire stopping in Melness?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Melness
Facilities managers in Melness often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. If you’re dealing with damaged fire seals in risers and voids and head-of-wall gaps with no fire seal, we can help, on pipe penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors alike. Looking for mastic applicators who cover Melness? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
In smaller Scottish places like Melness, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Melness (IV27)
- Wider area
- Highland
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What happens if it’s left?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a quote once you have the details.
Why clients in Melness choose us
- Fixed quotes based on photos, drawings or a visit
- Sealing commercial buildings since 2005
- Work to your specification and the manufacturer’s guidance
- CHAS accredited contractor
See what affects the cost or our accreditations and insurance.
How the quote is worked out
These are the things that shape the price:
- Backing rod, priming and other preparation
- How much existing material needs removing
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
What to include in your enquiry
Whether it’s one area or a whole building, these details speed things up:
- When you need the work done
- Photos of the joints, close up and from further back
- Drawings or a marked-up plan, if available
- Whether the building will be occupied during the work
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Fire stopping in Melness: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. We install fire-rated sealant to that tested detail where it is specified.
Wherever the building is near Melness, design and sign-off of fire stopping sit with the designer, fire engineer or building control; we install what has been specified.
Melness is about 33 miles west of Thurso, in Highland. We cover commercial sites throughout Melness, for single jobs and planned programmes alike. Across Highland, 256 places are covered, Melness among them.
Commercial sites across IV27 are covered for service penetrations. Buildings on Cornhill Road and Joseph Mackay Court are within our area. If your building is just outside Melness, we cover Tongue (4 miles south), Am Blàran Odhar (7 miles east), Smoo (11 miles west), Diuranais (12 miles west) and Strathy (15 miles east). Where a site is remote or on an island, travel and materials need planning ahead, so the full address helps from the start.
Local landmarks in Melness
A little further out are Castle Varrich (3.6 miles south). Green spaces nearby include Cnoc an Fhreiceadain and An Dubh-loch.
What we can’t put right
Some faults sit outside our scope, and we say so rather than covering them up:
- Approving the work on behalf of building control
- Deciding what a wall or floor needs, which belongs to the designer
- Walls or floors that aren’t fire-resisting to begin with
Not sure which it is? You can ring 01277 525 020 or send photos by email and we will tell you honestly before you book.
What we seal
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
Towns and villages near Melness
Also in Melness
Maintenance after handover
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Keep general-purpose fillers away from compartment walls
- Settle who seals which penetrations at the start of a project
- Look above ceilings when tiles are lifted for other jobs
- Keep product data and details in the fire safety file
Allow the manufacturer’s stated cure time before boxing in or decorating. Some fire-rated sealants accept paint and some don’t.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
From enquiry to sign-off
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. Jobs near Melness are often grouped with others in the same area. Let us know if your dates have any give.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Flag any permit to work we will need
- Clear stock, furniture or equipment away from the joints
- Let building users know which areas are affected
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or use the quote form.
Advice
Common problems we fix in Melness
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access typically bring them to light.
Common reasons buildings call us in:
- Unsealed openings around new pipes and cables
- Snag lists that include open service penetrations
- Unsealed joints where partitions meet the slab
- Expanding foam used as fire stopping
For buildings in and around Melness, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Questions to ask before you book
- Whether their applicators hold CSCS cards
- Their pre-qualification and accreditations
- The terms of the workmanship guarantee
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Your questions answered
What do Scotland’s building standards say about service penetrations in Melness?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Do you design the fire stopping for buildings in Melness?
No. The designer or fire engineer sets the detail and building control accepts it. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
How do I request a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email a schedule or drawings. Photos, drawings or a joint schedule help us quote quickly.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Can you send site paperwork?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
What do you charge?
We don’t publish prices, because every site is different. With photographs or drawings, we can give you a fixed quote.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.