Mattingley fire stopping
Commercial sealant work in Mattingley for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Improvised or mixed-product fire seals
- Damaged fire seals in risers and voids
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Mattingley
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Don’t let anyone top up a fire seal with the wrong product
- Include service cupboards in routine inspections
- Keep product data and details in the fire safety file
- Brief every trade that openings they make must be sealed
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way unless the designer specifies otherwise.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small.
About our fire stopping in Mattingley
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. If you’re dealing with openings left by services added after handover and improvised or mixed-product fire seals, we can put it right, on pipe penetrations, joints between fire-resisting walls and floors and linear gaps at wall heads alike. Looking for mastic applicators who cover Mattingley? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Rural conversions around Mattingley can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- Mattingley (RG27)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When it isn’t the sealant
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Plastic pipes whose detail calls for a collar or wrap
- Fire doors, dampers or other fire safety equipment
- Approving the work on behalf of building control
Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
What we seal
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
Also near Mattingley
More services for Mattingley
How a job runs
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before we move to the next. For work around Mattingley, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Have the specification and drawings to hand
- Let us know about inductions and permits
- Send asbestos survey details if the building is pre-2000
Quotes
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or send details through our quote form.
Read more
Different surfaces, different methods
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness first.
Fire stopping in Mattingley: the local picture
Mattingley lies roughly 39 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Large healthcare estates like Fleet Community Hospital, 4.7 miles south-east of Mattingley, change their services often, so penetration seals are worth checking after M&E work. For a building at a site such as Murrell Green Business Park (1.9 miles south of Mattingley), a check of penetration seals after each fit-out is good practice.
Mattingley is about 5 miles west of Yateley, in Hampshire. Across the RG27 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 723 places in Hampshire. We also cover Reading, some 9 miles away.
We take on service penetrations across the RG27 postcode area. Among the streets we cover are Reading Road and Bottle Lane. Just outside Mattingley, we also work in Hound Green (1 mile north), Hazeley (1 mile north-east), Rotherwick (1 mile south-west), Lyde Green (2 miles west) and Heckfield (2 miles north). Further afield, our area takes in Basingstoke (7 miles south-west), Farnborough (8 miles east), Fleet (6 miles south-east), Aldershot (9 miles south-east), Alton (11 miles south) and Yateley (5 miles east).
Local landmarks in Mattingley
In Mattingley, that means premises near Leather Bottle Public House and the streets around them. For rail, the closest station is Hook station, about 2.5 miles south. Well-known places in the area include Odiham Castle (3.7 miles south) and West Green House Agricultural Museum (1.2 miles south-east). Green spaces nearby include The Marshes Local Nature Reserve and Dogmersfield Lake.
Should maintenance staff do it?
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Signs you need fire stopping in Mattingley
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint, and the wrong product can split as a result. The tested detail for a linear joint states the width and movement it covers.
What tends to prompt an enquiry:
- Unsealed joints where partitions meet the slab
- Expanding foam used as fire stopping
- Openings left by services added after handover
- Fire seals cut back for extra cables and never reinstated
For a building such as Mattingley Church, new heating or data runs are the usual reason penetrations need sealing.
Comparing quotes
- Their approach to joint depth and backing
- Who will actually carry out the work
- Are they CHAS accredited or on Constructionline?
- How they’ll work around occupants
Common questions from Mattingley clients
Does your area include sites such as Murrell Green Business Park, near Mattingley?
Yes, sites like Murrell Green Business Park are within our area, along with the rest of Mattingley. To start, just call 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
How does the move away from BS 476 affect penetration seals in Mattingley?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
Can staff carry on working while you’re here?
Yes, as long as we plan it. Tell us your site hours and access windows and we will plan around them.
How long does a job like this take?
It depends on the scope, though a typical visit usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.