Fire-rated sealing and fire stopping in Martin, Kent
Fire stopping in Martin, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Improvised or mixed-product fire seals
- Unsealed joints where partitions meet the slab
- Unsealed openings around new pipes and cables
Need fire stopping in Martin?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
When to call us in Martin
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Clients typically get in touch after noticing something like this:
- Hidden openings found during inspections
- Head-of-wall gaps with no fire seal
- Fire stopping installed outside its tested range
- Openings left by services added after handover
Tenant changes at parks like White Cliffs Business Park, 2.4 miles to the south-west of Martin, bring new data and services, and openings through fire-resisting walls need the specified seal.
What to look for in a quote
- Will failed sealant be removed rather than covered?
- How joint depth will be controlled
- The terms of the workmanship guarantee
- Proof of insurance
Fire stopping for commercial buildings in Martin
Facilities managers in Martin often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you have fire-stopping items raised at inspection or handover and openings left by services added after handover, we can put it right, whatever the surface. A single leaking joint is often how a building in Martin first comes to us: we look at the rest while we’re there and tell you what we find.
Smaller places such as Martin still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
A 12-month guarantee applies to all our work in Kent. Should something we installed fail, ring 01277 525 020 or email us and we will come back to it.
- Where
- Martin (CT15)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
What we can’t put right
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. These need a different solution:
- Fire doors, dampers or other fire safety equipment
- Approving the work on behalf of building control
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, call the office on 01277 525 020 or send details through our quote form and we will say what we think.
Where we work in Martin
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
Fire-rated sealing for Martin buildings
Martin has a number of hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product. Martin lies roughly 66 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
For a building such as Church of St Augustine, new heating or data runs are the usual reason penetrations need sealing. Holiday works at schools like Langdon Primary School often leave service openings to seal before pupils return.
Martin is about 3 miles north-east of Dover, in Kent. Any commercial site in Martin is covered, whether it’s a single job or part of a planned programme. Martin is one of 931 places in Kent on our list. For work in that direction, see our London page.
Anyone looking for fire stopping in CT15 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on The Street, Waterworks Lane and Ringwould Road are within our area. Just outside Martin, we also work in Martin Mill (1 mile south-east), East Langdon (1 mile south-west), West Langdon (1 mile west), Ringwould (1 mile north-east) and Sutton (1 mile north). Nearby towns on our patch include Canterbury (13 miles north-west), Margate (14 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (13 miles north).
What’s near Martin
Around Martin, our work takes us to commercial buildings near The Lantern Inn and Duke of York's Royal Military School. There’s a railway station in Martin itself: Martin Mill station. Other landmarks nearby include Royal Victoria Hospital (3.6 miles south-west) and St Margaret's Museum (2.5 miles south-east). Not far away are Dover Western Heights.
Questions we are asked in Martin
Can you take on a job at a hospital such as Royal Victoria Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Will you take on work at estates like White Cliffs Business Park, close to Martin?
Yes. Our area takes in Martin and its surroundings, with estates and business parks such as White Cliffs Business Park included. Photos and a short description are enough for a first look.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Is fire stopping in Scotland covered by different guidance?
Our area runs from Greater London and the South East to every part of Scotland. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Is the work guaranteed?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Can you fire stop behind the services contractors?
Yes. Send the schedule or marked-up drawings and the specified product details. We can follow the services contractor floor by floor.
Commercial clients in Martin
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
Why it’s worth doing now in Martin
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. Halls, stores and units around places like Martin may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why us?
- Sealing commercial buildings since 2005
- Health and safety: CHAS accredited
- Constructionline member for supplier checks
- Specification-led, product-correct work
Take a look at our cost guide and our accreditations and insurance.
On site: what to expect
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a building around Martin, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Tell staff and tenants when we’ll be in
- Point out any areas we must not close
- Send any specification or drawings in advance
Getting a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Advice
Quoting for work in Martin
A fixed quote reflects the actual work. It takes account of:
- Distance, for remote addresses
- Working within restricted access windows
- Removal of failed or old sealant
- The product specified
The product called for affects the cost, and so does the preparation. Access, phasing and site rules also count.
Details that help us quote
We can often quote from photographs and a few details. Please tell us:
- Approximate linear metres or a joint schedule
- Specification clauses that apply
- Clear photos of the problem areas
- Asbestos survey details if the building is older
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.