Fire-rated sealing and fire stopping in Maplescombe, Kent
Fire-rated and intumescent sealing of service penetrations and linear gaps in Maplescombe. CHAS accredited and fully insured, with a 12-month guarantee.
- Builders’ foam or ordinary silicone in compartment walls
- Damaged fire seals in risers and voids
- Penetration schedules that need working through
Need fire stopping in Maplescombe?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to bring in a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Fire stopping in Maplescombe, done properly
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. If you are dealing with fire seals cut back for extra cables and never reinstated and old intumescent sealant that has split away, we can put it right, on service gaps in risers, pipe penetrations and cable penetrations alike. For commercial sealant work in Maplescombe, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Smaller places such as Maplescombe still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Maplescombe (DA4)
- Region
- Kent
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
FAQs: Maplescombe
Do you work on fire-rated sealing in hotels in Maplescombe?
Yes, where the specification calls for fire-rated sealant. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
Is Maplescombe off your patch?
Not at all. Maplescombe is within our area. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
Is colour matching possible?
It depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Is the work guaranteed?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Are you CHAS accredited?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Penetration seals near Maplescombe
A 2-mile radius around Maplescombe takes in several hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail.
For a hotel such as Mercure Brands Hatch Hotel, which lies north-east of Maplescombe, penetration seals are worth checking after any refit or services upgrade. At a healthcare site like Sevenoaks Hospital (5 miles south-west of Maplescombe), new services through compartment walls are a constant, and each needs the specified seal.
Maplescombe is about 6 miles north-east of Sevenoaks, in Kent. Maplescombe sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Maplescombe is one of 931 places we cover in Kent. There’s a separate page for London, roughly 18 miles from Maplescombe.
If you need fire stopping in DA4, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Just outside Maplescombe, we also work in West Kingsdown (1 mile south-east), East Hill (1 mile south), Eynsford (1 mile north-west), Knatts Valley (2 miles south) and Speed Gate (2 miles north-east). Bigger towns within reach include Maidstone (14 miles south-east), Dartford (6 miles north), Sevenoaks (6 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (8 miles north-east) and Tonbridge (11 miles south).
Near you in Maplescombe
Maplescombe’s nearest station is Eynsford station, about 1.6 miles west. Well-known places in the area include Eynsford Castle (1.5 miles north-west) and Sevenoaks Hospital (5 miles south-west).
Nearby places to Maplescombe
Other services in Maplescombe
Owners, agents and contractors
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
When to call us in Maplescombe
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Things that normally lead to an enquiry:
- Expanding foam used as fire stopping
- Fire-stopping items raised at inspection or handover
- Improvised or mixed-product fire seals
- Openings found when ceilings come down for a refit
Industrial units on estates such as Blue Chalet Industrial Park (to the east of Maplescombe) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Questions to ask before you book
- Whether their applicators hold CSCS cards
- How the existing material will be dealt with
- What level of public liability insurance do they hold?
- What site paperwork they can supply
Different surfaces, different methods
Risers and ceiling voids
Voids hide a lot of unsealed openings. We follow your schedule area by area, and note anything we find that isn’t on it.
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail.
Our process
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. If others near Maplescombe need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Arrange parking or a loading space
- Point out any areas we must not close
Ask for a quote
For a fixed quote, phone 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
After the work
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Agree the fire-stopping specification before services go in
- Check risers and ceiling voids after each round of works
- Check with the data sheet before painting over fire sealant
- Flag new cables with no seal around them
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail using the same product.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate.