Fire-rated sealing and fire stopping in Farningham, Kent
Need fire stopping in Farningham? It’s simple: send details, get a quote, we seal, guaranteed.
- Fire-rated sealant that has cracked or shrunk back
- Head-of-wall gaps with no fire seal
- Fire-stopping items raised at inspection or handover
Fire stopping across Farningham
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Farningham, done properly
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. Those on your schedule are closed with the specified product. The enquiries we see most involve expanding foam used as fire stopping and open linear gaps along the top of fire-resisting walls, across cable penetrations, service gaps in risers and linear gaps at wall heads. Looking for mastic applicators who cover Farningham? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Rural conversions around Farningham can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Farningham (DA4)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Where services cross fire walls in Farningham
Several hotels sit less than 2 miles from Farningham. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. At about 16 miles from central London, Farningham is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
At a university such as University of Greenwich, which lies north-east of Farningham, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. In a building such as Church of Saint Peter and Saint Paul, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Farningham is about 5 miles south of Dartford, in Kent. We cover Farningham, with the same fixed quotes and 12-month guarantee as everywhere else. Farningham is one of 931 places we cover in Kent. Sites around London have their own page, roughly 16 miles from Farningham.
We cover the DA4 postcode districts. If your site is on High Street, London Road and South Hall Close or close by, we can quote for service penetrations. Just outside Farningham, we also work in Eynsford (1 mile south-west), Horton Kirby (1 mile north-east), Maplescombe (2 miles south-east), Speed Gate (2 miles east) and Fawkham Green (3 miles east). Bigger towns within reach include Maidstone (15 miles south-east), Dartford (5 miles north), Sevenoaks (7 miles south), Gravesend (8 miles north-east), Tonbridge (13 miles south) and Northfleet (7 miles north-east).
Local landmarks in Farningham
Around Farningham, our work takes us to commercial buildings near Pied Bull pub, among other places. The closest station to Farningham is Eynsford station, about 1.4 miles south-west of the centre. Other landmarks nearby include Eynsford Castle (0.7 miles south-west) and Darenth Park Hospital (4.2 miles north). For a walk, there’s The Warren.
Farningham: questions and answers
Does your area include sites such as Southern Cross Industrial Estate, near Farningham?
Yes. Estates, retail parks and business parks around Farningham, Southern Cross Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Is Farningham off your patch?
Not at all. Farningham is within our area. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Can you reseal penetrations after our M&E works?
Yes, provided a specification covers them. New services after M&E works often breach existing seals.
What’s the quickest route to a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Is sealant suitable for all service openings?
No. A sealant’s evidence covers set services, gaps and wall or floor types. If an opening falls outside, it needs another solution, as set out by the designer.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
Can you tell us what fire stopping our building needs?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
On site: what to expect
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a building around Farningham, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Send your site hours and access windows
- Tell us which areas need to stay in use
- Let us know about inductions and permits
Request a quote
For a fixed quote, phone 01277 525 020 or email the details over, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
How the job changes by surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Towns and villages near Farningham
Also in Farningham
Keeping the joints sound
After handover, these steps help:
- Record which product was used where
- Keep general-purpose fillers away from compartment walls
- Get seals inspected before ceilings and boxing close
- Check with the data sheet before painting over fire sealant
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job.
Do you need fire stopping in Farningham?
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls and later need putting right.
Common reasons buildings call us in:
- Unsealed openings around new pipes and cables
- Seals disturbed by maintenance and left open
- Open linear gaps along the top of fire-resisting walls
- Openings found when ceilings come down for a refit
Industrial units on estates such as Southern Cross Industrial Estate (1.7 miles north-west of Farningham) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Comparing quotes
- What site paperwork they can supply
- How joint depth will be controlled
- Is the sealant right for the movement and the substrate?
- Will CSCS-carded applicators be on site?
Honest limits
Some faults sit outside our scope, and we say so rather than covering them up:
- Writing the fire-stopping specification
- Signing off or certifying a building’s fire stopping
- Reviewing a building’s overall fire safety
If in doubt, phone 01277 525 020 or email the details over and we will say what we think before you book.
What we seal
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors