Fire Stopping in Little Coxwell
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Little Coxwell. Send photos or drawings for a fixed quote.
- Fire seals cut back for extra cables and never reinstated
- Expanding foam used as fire stopping
- Open linear gaps along the top of fire-resisting walls
Fire stopping in Little Coxwell
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Little Coxwell, done properly
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Little Coxwell. The enquiries we see most involve seals disturbed by maintenance and left open and fire-rated sealant that has cracked or shrunk back, across small duct penetrations where the tested detail allows, joints between fire-resisting walls and floors and pipe penetrations. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Little Coxwell, preparation and product choice get the time they need.
A job near Little Coxwell is typically planned around one visit, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, give us a call on 01277 525 020 or send photos by email and we will arrange a return visit.
- Where
- Little Coxwell (SN7)
- Region
- Oxfordshire
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Your questions answered
Is Little Coxwell off your patch?
Not at all. Little Coxwell is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Do you work in occupied care homes around Little Coxwell?
Yes. We work around residents’ routines, a room or two at a time. Noise and disruption are kept to a minimum.
Will you sign off the seals for us?
No. Approval sits with the designer, principal designer or building control. We will confirm the products and details used and agree any further records when we quote.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Are you members of a third-party fire-stopping installer scheme?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t, so it’s worth checking what your contract says. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
How long does a job like this take?
It depends on the scope, but the work normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Is colour matching possible?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Also near Little Coxwell
What else we do in Little Coxwell
Leave it or put it right?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is typically a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Halls, stores and units around places like Little Coxwell may not be checked every day, which gives a failed joint time to do damage. Resealing early avoids that.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why appoint us
- Old sealant cut out, never sealed over
- 12-month guarantee on workmanship
- One phone line for London, the South East and Scotland
- Specification-led, product-correct work
Signs you need fire stopping in Little Coxwell
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it and has to be removed.
Look out for the following:
- Improvised or mixed-product fire seals
- Expanding foam used as fire stopping
- Seals disturbed by maintenance and left open
- Fire-rated sealant that has cracked or shrunk back
For a hotel such as The Crown Hotel, 1.4 miles to the north of Little Coxwell, penetration seals are worth checking after any refit or services upgrade.
Questions to ask before you book
- Their pre-qualification and accreditations
- Their approach to joint depth and backing
- Their public liability cover
- What site paperwork they can supply
Surface by surface
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products.
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, along the full length of the run.
Aftercare for building managers
Cleaning and maintenance staff play a part too. Pass these on to them:
- Treat an open penetration as a priority repair
- Agree the fire-stopping specification before services go in
- Leave fire sealant to cure fully before covering it
- Have penetrations checked while they can still be seen
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For work around Little Coxwell, we aim to finish in one visit, so photographs and measurements up front really help. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- Tell us your opening times and when work is allowed
- Send asbestos survey details if the building is pre-2000
- Tell us what induction or permit system the site runs
Ask for a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or use the quote form.
Advice
Work for main contractors and building owners
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
Fire-rated sealing for Little Coxwell buildings
At about 65 miles from central London, Little Coxwell is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls. The area within 2 miles of Little Coxwell holds several hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Halls and meeting rooms at places like Church of St Mary sometimes gain new services, and any compartment wall crossed needs the specified seal. Hospital estates such as Faringdon Day Hospital, 1.2 miles north of Little Coxwell, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Little Coxwell is about 1 mile south of Faringdon, in Oxfordshire. We send applicators to Little Coxwell for service penetrations, handled exactly as we handle every other area. We work across 423 places in Oxfordshire. For work in that direction, see our Oxford page (17 miles or so).
Anyone looking for fire stopping in SN7 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Nearby places we also cover include Faringdon (1 mile north), Fernham (1 mile south-east), Shellingford (2 miles east), Baulking (3 miles south-east) and Uffington (3 miles south-east). A short drive away, we cover Didcot (15 miles east), Abingdon-on-Thames (14 miles east), Witney (11 miles north-east), Carterton (9 miles north), Wantage (8 miles south-east) and Grove (8 miles east).
Local landmarks in Little Coxwell
Locally, jobs take us to sites close to Faringdon Infant School and Eagle Tavern, among other places. Other landmarks nearby include Faringdon Day Hospital (1.2 miles north) and Faringdon Museum (1.4 miles north). Not far away are Badbury Hill.