Shellingford fire stopping
Fire stopping for Shellingford, from a contractor working since 2005. Fully insured and CHAS accredited.
- Openings found when ceilings come down for a refit
- Non-fire-rated filler around services
- Seals that don’t match their tested detail
Fire stopping across Shellingford
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Shellingford, done properly
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. If you are dealing with seals disturbed by maintenance and left open and seals that don’t match their tested detail, we can put it right. Searching for sealant specialists in Shellingford? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Around smaller places like Shellingford, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Shellingford (SN7)
- Region
- Oxfordshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Work for main contractors and building owners
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Shellingford can form part of a wider programme across Oxfordshire.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Other services in Shellingford
Fire stopping in Shellingford: the local picture
Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. At about 63 miles from central London, Shellingford is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
In a school such as Shellingford Church of England (Voluntary Aided) School, fire-rated sealant goes in around service penetrations where it is specified. Hospital estates such as Longworth Hospital (2.3 miles north-west of Shellingford) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Shellingford is about 6 miles north-west of Wantage, in Oxfordshire. Looking for fire stopping in Shellingford? We can help. Shellingford is one of 423 places we cover in Oxfordshire for service penetrations. Sites around Oxford have their own page, about 15 miles away.
Work on service penetrations is covered throughout SN7, for business premises of every kind. For a building on Church Street and Fernham Road or nearby, send details and we’ll quote for service penetrations. Nearby places we also cover include Stanford in the Vale (1 mile east), Hatford (2 miles north-east), Baulking (2 miles south), Bow (2 miles east) and Fernham (2 miles south-west). Bigger towns within reach include Oxford (15 miles north-east), Didcot (13 miles east), Abingdon-on-Thames (11 miles east), Witney (10 miles north), Carterton (9 miles north) and Wantage (6 miles south-east).
Around Shellingford
Locally, jobs take us to sites close to Faringdon Community College and the streets around them. Other landmarks nearby include Faringdon Castle (1.9 miles north-west) and Faringdon Museum (2.2 miles north-west). Open spaces near Shellingford include Badbury Hill.
Why act early in Shellingford
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed. Converted and older buildings near places like Shellingford tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
What you get with us
- One phone line for London, the South East and Scotland
- Fixed quotes based on photos, drawings or a visit
- Sealing commercial buildings since 2005
- CHAS accredited
See how commercial sealant jobs are priced and how we’re accredited.
Questions we’re asked in Shellingford
How does the move away from BS 476 affect penetration seals in Shellingford?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is hospital work, at somewhere like Longworth Hospital, something you do?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. We’ll give you an estimate of time on site when we quote.
Is your workmanship covered by a guarantee?
Yes. Our workmanship is backed for 12 months.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Do you need to see the site first?
That depends on the size and complexity of the job. Simple work can often be priced from photographs, and bigger or more complex jobs usually get a visit.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
What we can’t put right
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Walls or floors that aren’t fire-resisting to begin with
- Fire doors, dampers or other fire safety equipment
- Approving the work on behalf of building control
If in doubt, ring 01277 525 020 or email drawings and photos and we’ll say what we think.
What we seal
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
How the quote is worked out
A fixed quote reflects the actual work. It allows for:
- The size and state of each joint
- Induction, permit and paperwork requirements
- Which sealant the job calls for
- Location, for remote and island sites
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Any specification or named product
- The type of building and who uses it
- How the joints are reached, and at what height
- Asbestos survey details if the building is older
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email drawings and photos with what you know.
When to call us in Shellingford
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls and later need putting right.
It’s worth sending us details if you spot any of the following:
- Head-of-wall gaps with no fire seal
- Fire sealant pulled out of the opening
- Fire stopping installed outside its tested range
- Unsealed penetrations discovered above suspended ceilings
For a building at a site such as Stanford in the Vale Business Park, 0.8 miles east of Shellingford, a check of penetration seals after each fit-out is good practice.
What to look for in a quote
- Whether primer will be used where the manufacturer specifies it
- Which product they’ll use, and why it suits the joint
- The terms of the workmanship guarantee
- Who will actually carry out the work
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. For a building around Shellingford, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Warn occupants and staff about the work
- For older buildings, check the asbestos register before work
- Move anything stored against the joints
Quotes
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.