The Mastic Doctor team standing beside their branded vans outside an office building
Perth and Kinross · Scotland

Fire stopping in Little Ballinluig

Fire-rated and intumescent sealing of service penetrations and linear gaps across Little Ballinluig, by CSCS-carded applicators. Fully insured and CHAS accredited.

  • Unsealed openings around new pipes and cables
  • Penetration schedules that need working through
  • Unsealed penetrations discovered above suspended ceilings
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS accredited
£5m public liability

Fire stopping across Little Ballinluig

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Fire stopping for commercial buildings in Little Ballinluig

No fire sealant works on its own: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow. We work on service gaps in risers, cable penetrations and pipe penetrations, and what we’re called in for most is service penetrations left open after M&E works and builders’ foam or ordinary silicone in compartment walls. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Little Ballinluig is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.

In smaller Scottish places like Little Ballinluig, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.

Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Little Ballinluig (PH15)
Wider area
Perth and Kinross
Guarantee
12 months on every job
Price
Quoted before any work starts
Phone
01277 525 020
Last updated
3 November 2026

Site staff or a sealant specialist?

A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.

What affects the price in Little Ballinluig

Your fixed quote is built from the real scope. It allows for:

  • Quantities, in metres or numbers
  • Backing rod, priming and other preparation
  • The product specified
  • Induction, permit and paperwork requirements

Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.

Sending details for a quote

We can often quote from photos and a few details. Please tell us:

  • Any specification or named product
  • How the joints are reached, and at what height
  • Drawings or a marked-up plan, if available
  • Photos of the joints, close up and from further back

We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email drawings and photos.

From enquiry to sign-off

We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Jobs near Little Ballinluig are often grouped with others in the same area. Tell us how flexible your dates are.

  1. First we confirm the product and tested details named in the specification.
  2. We sort the openings by the detail each one needs.
  3. Improvised fillers and failed sealant are removed.
  4. Where the detail needs backing, it goes in at the stated depth.
  5. We gun the sealant in to the specified depth around each service and tool it.
  6. We walk the completed areas with you and confirm the records agreed at quote stage.

Before we start on site

  • Warn occupants and staff about the work
  • Send asbestos survey details if the building is pre-2000
  • Tell us your opening times and when work is allowed

Getting a fixed quote

If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.

Get a price

Read more

When something else is needed

Being straight saves everyone time. Fresh joints won’t solve:

  • Reviewing a building’s overall fire safety
  • Approving the work on behalf of building control
  • Plastic pipes whose detail calls for a collar or wrap

If you are not sure, just phone 01277 525 020 or email us and we’ll give you a straight answer.

Surfaces we seal

  • Pipe penetrations
  • Small duct penetrations where the tested detail allows
  • Joints between fire-resisting walls and floors
  • Linear gaps at wall heads
  • Service gaps in risers
  • Cable penetrations

How the job changes by surface

Metal pipes

Metal pipes conduct heat, so their details often call for extra measures along the pipe, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.

Plastic pipes

Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes, though larger ones typically call for a collar or wrap. We check the pipe material and diameter against the detail before we start.

Your questions answered

Which Scottish guidance covers penetration seals in Little Ballinluig?

Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.

Is a hospital such as Pitlochry Community Hospital somewhere you can work?

Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.

What happens if old sealant might contain asbestos?

The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.

Do your applicators hold CSCS cards?

Yes. Our applicators hold CSCS cards.

Do you have public liability insurance?

Yes. We’re fully insured, including public liability cover.

Do you need to see the site first?

Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.

Is Little Ballinluig in your area?

Yes. We cover Little Ballinluig, and the simplest way to start is to give us a call on 01277 525 020 or use the quote form.

Common problems we fix in Little Ballinluig

Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps, and the wrong product can split as a result. The tested detail for a linear joint states the width and movement it covers.

Common reasons buildings call us in:

  • Penetration schedules that need working through
  • Damaged fire seals in risers and voids
  • Non-fire-rated filler around services
  • Improvised or mixed-product fire seals

For a building such as Strathtay Parish Church, new heating or data runs are the usual reason penetrations need sealing.

Questions to ask before you book

  • Which product they’ll use, and why it suits the joint
  • The terms of the workmanship guarantee
  • What level of public liability insurance do they hold?
  • How joint depth will be controlled

How to choose a sealant contractor

Compartments and services around Little Ballinluig

Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.

At a healthcare site like Pitlochry Community Hospital, 3.7 miles to the north-east of Little Ballinluig, new services through compartment walls are a constant, and each needs the specified seal. Hotels such as The Grandtully Hotel (less than half a mile north-east of Little Ballinluig) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.

Little Ballinluig is about 17 miles west of Blairgowrie and Rattray, in Perth and Kinross. Any commercial site in Little Ballinluig is covered, whether it’s a single job or part of a planned programme. Across Perth and Kinross, 114 places are covered, Little Ballinluig among them. We also cover Dundee, some 33 miles away.

Work on service penetrations is covered throughout PH15, whatever the building. We cover commercial and managed buildings on Aultbeag Road and Creag Eilid. We also cover Grandtully (1 mile north-east), Port na Craig (4 miles north-east), Logierait (4 miles east), Aberfeldy (4 miles south-west) and Pitlochry (4 miles north-east).

Near you in Little Ballinluig

Little Ballinluig’s nearest station is Pitlochry station, about 3.8 miles north-east. Well-known places in the area include Tom na Croiche (4 miles east) and Pitlochry Community Hospital (3.7 miles north-east). Green spaces nearby include Loch na Bà.

Map of Little Ballinluig © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.