Fire-rated sealing and fire stopping in Kinlochmore, Highland
Fire-rated and intumescent sealing of service penetrations and linear gaps in Kinlochmore and across Highland. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Unsealed openings around new pipes and cables
- Openings found when ceilings come down for a refit
- Non-fire-rated filler around services
Need fire stopping in Kinlochmore?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What sets the cost
Before we quote, we look at:
- Removal of failed or old sealant
- Induction, permit and paperwork requirements
- Joint width, depth and condition
- How accessible the joints are
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Specification clauses that apply
- Where the site is, with the postcode
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or send details through our quote form.
Fire stopping in Kinlochmore
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and the failures we’re asked to look at most are fire stopping installed outside its tested range and fire-rated sealant that has cracked or shrunk back. One point of contact handles commercial sealant work in Kinlochmore from the first photographs to the final walk-round, whether it’s one building or several.
In smaller Scottish places like Kinlochmore, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Kinlochmore (PH50)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Where services cross fire walls in Kinlochmore
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified. Several hotels sit less than 2 miles from Kinlochmore. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Hotels such as MacDonald Hotel (to the west of Kinlochmore) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. Offices at parks like Kinlochleven Business Park, less than half a mile to the south-east of Kinlochmore, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
Kinlochmore is in Highland. We send applicators to Kinlochmore for service penetrations. Our Highland coverage takes in 256 places. For work in that direction, see our Glasgow page, about 65 miles away.
Work on service penetrations is covered throughout PH50, whatever the building. We cover commercial and managed buildings on Kearan Road, Lochaber Road and Lochaber Crescent. If your building is just outside Kinlochmore, we cover Kinlochleven (1 mile south), Glencoe (6 miles south-west), Ballachulish (7 miles south-west), Blarmachfoldach (7 miles north-west) and Fort William (9 miles north-west). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Landmarks near Kinlochmore
The countryside around Kinlochmore includes Loch Eilde Mòr.
Our process
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Travel to smaller Scottish places like Kinlochmore is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
- Confirm the product named in the specification
Quotes
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Related advice
How the job changes by surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough, and we won’t substitute it for a specified collar.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance.
Nearby places to Kinlochmore
More services for Kinlochmore
Kinlochmore: questions and answers
How do Scotland’s building standards affect fire-rated sealant in Kinlochmore?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you work at a site such as Kinlochleven Business Park, by Kinlochmore?
Yes. Estates, retail parks and business parks around Kinlochmore, Kinlochleven Business Park among them, are all within reach. Photos and a short description are enough for a first look.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
How do you choose the sealant?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It won’t put right:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Construction that lacks the fire resistance the seal relies on
- Issuing fire ratings or certificates for seals
If in doubt, call 01277 525 020 or email the details over and we’ll say what we think before you book.
Surfaces we seal
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
Why deal with it now?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first. For buildings near Kinlochmore, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why clients in Kinlochmore choose us
- Failed material removed, not covered up
- One phone line for London, the South East and Scotland
- Fixed quotes based on photos, drawings or a visit
- Public liability insurance in place
Site staff or a sealant specialist?
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.