Fire-rated sealing and fire stopping in Hoath, Kent
Looking for fire stopping in Hoath? It’s simple: send details, get a quote, we seal, guaranteed.
- Penetration schedules that need working through
- Unsealed openings around new pipes and cables
- Seals disturbed by maintenance and left open
Fire stopping for businesses in Hoath
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Hoath
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. So our job is to reproduce that arrangement faithfully. We work on service gaps in risers, joints between fire-resisting walls and floors and linear gaps at wall heads, and the usual reasons a site gets in touch are unsealed penetrations discovered above suspended ceilings and seals that don’t match their tested detail. Whether you call it commercial sealant work, mastic application or joint sealing, in Hoath it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a smaller site near Hoath, we plan to do all the penetrations in one go, with the specification and photographs sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Hoath (CT3)
- Region
- Kent
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Metal pipes
Sealant details often cover copper and steel pipework. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail and we confirm each before sealing.
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Some intumescent sealants are tested on smaller plastic pipes, but many need a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.
What we can’t put right
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Large openings beyond what any sealant detail covers
- Signing off or certifying a building’s fire stopping
- Writing the fire-stopping specification
Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly.
What we seal
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and our waste is bagged and taken away as we go. For a building around Hoath, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Arrange parking or a loading space
- Have the specification and drawings to hand
- Let us know about inductions and permits
Getting a fixed quote
To get a fixed quote, give us a call on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Related advice
Cost factors for service penetrations
The price varies from site to site. Expect it to depend on:
- Backing rod, priming and other preparation
- Working within restricted access windows
- The total length or number of joints
- Induction, permit and paperwork requirements
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- Approximate linear metres or a joint schedule
- How the joints are reached, and at what height
- The type of building and who uses it
- The postcode of the building
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Aftercare for building managers
For the best life from the joints:
- Check with the data sheet before painting over fire sealant
- Look above ceilings when tiles are lifted for other jobs
- Agree the fire-stopping specification before services go in
- Put resealing into every M&E and fit-out package
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail, by someone who knows the system.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
Penetration seals near Hoath
Central London is about 55 miles from Hoath. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
On a site such as Chislet Business Park, 0.8 miles south of Hoath, every fit-out that runs new services through a compartment wall leaves penetrations to seal with the specified product. Wherever services are added at a hospital such as Queen Victoria Memorial Hospital (to the north of Hoath) the compartment line has to be made good with the specified product. Holiday works at schools like Hoath Primary School often leave service openings to seal before pupils return.
Hoath is about 3 miles south-east of Herne Bay, in Kent. Any commercial site in Hoath is covered. Across Kent, 931 places are covered, including Hoath. There’s a separate page for London, about 55 miles away.
Work on service penetrations is covered throughout CT3, whatever the building. If your site is on Church Road, Marley Lane and Barn Close or close by, we can quote for service penetrations. Nearby places we also cover include Maypole (1 mile north), Knave's Ash (1 mile west), Old Tree (1 mile north-east), Millbank (1 mile north) and Hollow Street (1 mile east) for service penetrations. A short drive away, we cover Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Local landmarks in Hoath
We work on buildings around Spires Academy and Curtis Wood and the streets around them. For rail, the closest station is Herne Bay station, roughly 2.9 miles north-west. A little further out are St Martins Hospital (4.6 miles south-west). Not far away are West Blean and Thornden Woods.
Places near Hoath
More services for Hoath
Hoath: questions and answers
What happens to BS 476 references for fire stopping in Hoath?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Can you work at a site such as Chislet Business Park, by Hoath?
Yes. Our area takes in Hoath and its surroundings, with estates and business parks such as Chislet Business Park included. To start, just call the office on 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we will send them with the quote.
How do I request a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
General trades versus a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.