Coloured Sealant in Hoath
Coloured and colour-matched sealant for visible joints in Hoath and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.
- Coloured joints that have cracked with movement
- Marked sealant in hotel bathrooms
- Joints that need to match a new RAL frame colour
Need coloured sealant in Hoath?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Our process
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Smaller jobs around Hoath can be grouped with others nearby. You will have a fixed quote before work starts.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Tell staff and tenants when we will be in
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
Quotes
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or email a schedule or drawings.
Related advice
How we handle coloured sealant in Hoath
In retail, hospitality and office fit-outs, joints are seen close up every day. A mismatched bead can make good joinery look unfinished, however well it was installed. We pick a colour from the product’s range that sits with the finish. We work on powder-coated and anodised frames, hotel bathrooms and public areas and shop-fit joinery and counters, and the failures we are asked to look at most are poorly tooled joints on visible finishes and old sealant that has yellowed, darkened or faded. Most enquiries from Hoath start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Commercial sealant work around smaller places like Hoath tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Kitchens, toilets and window frames in all of them need resealing sooner or later.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Hoath (CT3)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Once the work is signed off, these steps help:
- Ask contractors to check the colour before resealing
- Put the colour reference on the finishes schedule
- Protect fresh coloured sealant from dust and handling
- Avoid abrasive pads on coloured sealant
Include coloured sealant in planned building checks. Watch for cracks, peeling or discolouration and deal with problems early.
Include coloured joints in a planned maintenance cycle. A planned reseal avoids a run of patch repairs.
What affects the price in Hoath
What shapes the price:
- How much there is to seal
- Working within restricted access windows
- Access and working height
- The site’s rules and procedures
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- Access details, including height
- The postcode of the building
- Specification clauses that apply
- The type of building and who uses it
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Questions we’re asked in Hoath
Does the sea air around Hoath change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Is Hoath too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Will the sealant be an exact match to our finish?
No. An exact bespoke match isn’t something we can promise. We will show you the closest colours in the specified product’s range.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Do you need to see the site first?
It depends on the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.
What we’re called out for in Hoath
Internal joints can stain from cleaning products, spills or mould. Mould that has rooted into a bead rarely cleans out, so replacement is the fix.
Any of the following is a good reason to get the joints checked over:
- White or grey sealant that clashes with the finish
- Poorly tooled joints on visible finishes
- Shop fits that need consistent sealant colours across sites
- Marked sealant in hotel bathrooms
Offices and shops close to stations such as Herne Bay station, 2.9 miles to the north-west of Hoath, tend to be busy all day, so sealant work is planned around opening hours.
What to look for in a quote
- Which product they’ll use, and why it suits the joint
- Will RAMS and insurance details be available?
- Can the work be phased to keep areas open?
- Are they CHAS accredited or on Constructionline?
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Colour variation across natural stone or brick that no single shade can match
- Repairing damaged frames or cladding
- Overpainting a joint that needs a non-paintable product
If you are not sure, just ring 01277 525 020 or send details through our quote form and we will give you a straight answer.
Where we work in Hoath
- Office fit-out finishes
- Cladding panels
- Powder-coated and anodised frames
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Natural stone and brick
Nearby places to Hoath
What else we do in Hoath
Sealant on show in Hoath’s commercial buildings
Hoath is within about 3 miles of the coast. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. We choose a product rated for the exposure, then confirm the colours available for it. Rainfall across the South East, Hoath included, is lower than in many parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates.
On a business park such as Chislet Business Park (0.8 miles south of Hoath), sealant work tends to follow fit-outs: receptions, tea points, washrooms and frame perimeters. Occupiers with premises at both Chislet Business Park and Canterbury Industrial Park could have the sealant at each handled under one quote.
Hoath is about 3 miles south-east of Herne Bay, in Kent. Any commercial site in Hoath is covered, whether it’s a single job or part of a planned programme. Hoath is one of 931 places we cover in Kent for colour-matched joints. We also cover London, some 55 miles away.
Work on colour-matched joints is covered throughout CT3, whatever the building. Among the streets we cover are Church Road, Marley Lane and Barn Close. Nearby places we also cover include Maypole (1 mile north), Knave's Ash (1 mile west), Old Tree (1 mile north-east), Millbank (1 mile north) and Hollow Street (1 mile east). Further afield, our area takes in Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Near you in Hoath
In Hoath, that means premises near Spires Academy and Curtis Wood. For rail, the closest station is Herne Bay station, roughly 2.9 miles north-west. Well-known places in the area include St Martins Hospital (4.6 miles south-west). Open spaces near Hoath include West Blean and Thornden Woods.
How the job changes by surface
Shop-fit and joinery finishes
Counters, display units and wall linings are seen close up. A sharp, even bead is as important as the colour.
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We’ll suggest the nearest standard colours so you can choose.