Shorne Ridgeway fire stopping
Work needed on a service penetration in Shorne Ridgeway? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Snag lists that include open service penetrations
- Unsealed openings around new pipes and cables
Need fire stopping in Shorne Ridgeway?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Shorne Ridgeway
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. The enquiries we see most involve improvised or mixed-product fire seals and fire sealant pulled out of the opening, across linear gaps at wall heads, pipe penetrations and joints between fire-resisting walls and floors. A specialist sealant contractor works differently from a general builder: in Shorne Ridgeway, that means joint design, primers and backing rod as standard.
Around smaller places like Shorne Ridgeway, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Shorne Ridgeway (DA12)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What sets the cost
These are the things that shape the price:
- How much there is to seal
- Any access equipment needed
- The site’s rules and procedures
- Whether the work must be split into stages
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Where the site is, with the postcode
- A wide shot and a close-up of the area
- When you need the work done
- Whether the building will be occupied during the work
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Other services in Shorne Ridgeway
From enquiry to sign-off
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. If others near Shorne Ridgeway need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Tell us which areas need to stay in use
- Flag any permit to work we will need
- Warn occupants and staff about the work
Ask for a quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or email the details over to discuss it first.
Related advice
What the job involves on each surface
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point so we know it sits within the tested range, and any that don’t are flagged.
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail, so we check each one.
General trades versus a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Why deal with it now?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Halls, stores and units around places like Shorne Ridgeway may not be checked every day, which gives a failed joint time to do damage. Resealing early avoids that.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why appoint us
- CHAS accredited
- 12-month guarantee on workmanship
- Clear, fixed quotes
- Work to your specification and the manufacturer’s guidance
Take a look at what affects the cost and our accreditations.
Common problems we fix in Shorne Ridgeway
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Any of the following is a good reason to get the joints checked over:
- Head-of-wall gaps with no fire seal
- Seals disturbed by maintenance and left open
- Penetration schedules that need working through
- Seals that don’t match their tested detail
On a hospital site such as French Hospital (3.4 miles south-east of Shorne Ridgeway), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
What to look for in a quote
- Their public liability cover
- How joint depth will be controlled
- The named product and why it was chosen
- What the guarantee covers, and for how long
Fire stopping in Shorne Ridgeway: the local picture
Shorne Ridgeway lies roughly 24 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls. Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
For a unit at a centre such as Strood Retail Park, which lies east of Shorne Ridgeway, penetration seals are worth checking after each shop fit. For a site team at a college like North Kent College Gravesend Campus, which lies north-west of Shorne Ridgeway, fire-rated sealing is best scheduled after the summer works.
Shorne Ridgeway is about 3 miles south-east of Gravesend, in Kent. We send applicators to Shorne Ridgeway for service penetrations. Across Kent, 931 places are covered, Shorne Ridgeway among them. For work in that direction, see our London page.
Anyone looking for fire stopping in DA12 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Racefield Close, The Ridgeway and Tanyard Hill. Close to Shorne Ridgeway, our area also takes in Shorne (1 mile north), Upper Ifield (1 mile north-west), Higham (1 mile north-east), Gadshill (1 mile east) and Thong (1 mile west). A short drive away, we cover Maidstone (11 miles south-east), Sittingbourne (14 miles east), Dartford (9 miles west), Sevenoaks (14 miles south-west), Gravesend (3 miles north-west) and Northfleet (4 miles north-west).
Near you in Shorne Ridgeway
In Shorne Ridgeway, that means premises near Strood Academy, Shorne Woods Country Park and The Rose and Crown pub. Shorne Ridgeway’s nearest station is Higham station, about 2 miles north-east of the centre. Well-known places in the area include French Hospital (3.4 miles south-east) and Rochester Castle (3.2 miles east). For a walk, there’s Gad's Hill and Sawyers Lake.
Questions about Shorne Ridgeway
Is hospital work, at somewhere like French Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is a smaller place like Shorne Ridgeway outside your area?
No. Places such as Shorne Ridgeway are covered as much as the big towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
What will the job cost?
There isn’t a price list, as every site differs. Send photographs or drawings and we will price it at a fixed figure.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
Do you certify or sign off fire stopping?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. We work to the specification and the manufacturer’s installation guidance.
Will fire-rated sealant work on every penetration?
No. Each fire-rated sealant is tested for particular services, gap sizes and substrates. If an opening falls outside, it needs another solution, specified by your designer.