Fire stopping in Hallowood
Fire-rated and intumescent sealing of service penetrations and linear gaps in Hallowood and across Moray. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Seals disturbed by maintenance and left open
- Expanding foam used as fire stopping
- Unsealed openings around new pipes and cables
Need fire stopping in Hallowood?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our fire stopping in Hallowood
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, speak to us on 01277 525 020 or email drawings and photos with the schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. The enquiries we see most involve head-of-wall gaps with no fire seal and fire-rated sealant that has cracked or shrunk back, on linear gaps at wall heads, small duct penetrations where the tested detail allows and service gaps in risers. A specialist sealant contractor works differently from a general builder: on jobs in Hallowood, preparation and product choice get the time they need.
For a building near Hallowood, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photos of the openings, with sizes if you have them.
A 12-month guarantee applies to all our work in Moray. Should something we installed fail, call 01277 525 020 or email drawings and photos and we will come back to it.
- Location
- Hallowood (IV30)
- Wider area
- Moray
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Why deal with it now?
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. The specified fire seal closes the gap for all of these. Renewing every failing joint on one visit is the sensible approach for a place like Hallowood. Photos of each area help us quote the whole job.
Pricing service penetrations depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Why clients in Hallowood choose us
- A Constructionline member, so easy to vet
- Health and safety: CHAS accredited
- Clear, fixed quotes
- Over 20 years of commercial sealing
Read how commercial sealant jobs are priced and our accreditations and insurance.
Doing it in-house
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Other services in Hallowood
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For work around Hallowood, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Point out any areas we must not close
- Flag any permit to work we will need
- Send any specification or drawings in advance
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to phone 01277 525 020 or email us with what you know.
Read more
Fire stopping around Hallowood: what changes locally
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail. There are a number of hotels within about 2 miles of Hallowood. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
At a college such as Moray College UHI - Technology Centre (1.6 miles north-west of Hallowood), checking penetration seals after summer M&E works is good practice. For a hospital such as Dr Gray's Hospital, 2.7 miles to the north-west of Hallowood, penetration sealing is typically phased ward by ward, with infection-control rules agreed first.
Hallowood is about 2 miles south-east of Elgin, in Moray. We cover commercial sites throughout Hallowood. Hallowood is one of 59 places we cover in Moray for service penetrations. Aberdeen is covered too, some 54 miles away.
If you need fire stopping in IV30, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Close to Hallowood, our area also takes in Longmorn (2 miles south-west), Ashgrove (2 miles north-west), Lhanbryde (2 miles east), Elgin (2 miles north-west) and Fogwatt (2 miles south). Bigger towns within reach include Buckie (11 miles east), Forres (13 miles west), Lossiemouth (6 miles north), Keith (13 miles south-east), Burghead (10 miles north-west) and Fochabers (6 miles east). Where a site is remote or on an island, we plan travel and materials carefully.
Local landmarks in Hallowood
The nearest railway station is Elgin station, about 2 miles north-west. Well-known places in the area include Elgin Castle (2.6 miles north-west) and Dr Gray's Hospital (2.7 miles north-west). The countryside around Hallowood includes Loch Spynie and Findlay's Seat.
Your questions answered
Do you work on fire-rated sealing in hotels in Hallowood?
Yes, where the specification calls for fire-rated sealant. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
How do the Scottish rules apply to fire-rated sealing in Hallowood?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Are you insured?
Yes. We are fully insured, including public liability cover.
Do you cover Hallowood?
Yes. We cover Hallowood, and the simplest way to start is to call the office on 01277 525 020 or email us.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Do you need to see the site first?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Owners, agents and contractors
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Hallowood can form part of a wider programme across Moray.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Do you need fire stopping in Hallowood?
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped and the opening isn’t always resealed.
Most enquiries start with one or more of the following:
- Openings left by services added after handover
- Openings found when ceilings come down for a refit
- Unsealed joints where partitions meet the slab
- Snag lists that include open service penetrations
For a building such as St Andrews-Lhanbryd Parish Church, new heating or data runs are the usual reason penetrations need sealing.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- What site paperwork they can supply
- Whether old or failed sealant will be cut out, not overlaid
- Their plan for phasing and protecting the area
What sets the cost
Before we quote, we look at:
- Any access equipment needed
- Distance, for remote addresses
- How much there is to seal
- The site’s rules and procedures
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
Whether it’s one area or a whole building, the same details help:
- The product your specification calls for
- Whether an asbestos survey exists
- Any dates the work must fit around
- A wide shot and a close-up of the area
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or email us.