Fire stopping in Fulwell
Planning work on a service penetration in Fulwell? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Old intumescent sealant that has split away
- Fire-stopping items raised at inspection or handover
- Fire stopping installed outside its tested range
Fire stopping in Fulwell
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Fire stopping in Fulwell
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. Most enquiries involve unsealed penetrations discovered above suspended ceilings and old intumescent sealant that has split away, across small duct penetrations where the tested detail allows, service gaps in risers and joints between fire-resisting walls and floors. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Fulwell, preparation and product choice get the time they need.
London has many occupied offices, blocks and mixed-use buildings where services are added and rerouted all the time. Where the specification names fire-rated sealant, it goes in exactly as the manufacturer’s test evidence shows for that wall or floor.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Fulwell (TW11, TW2, TW12)
- Wider area
- Greater London
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What sets the cost
Before we quote, we look at:
- Location, for remote and island sites
- Joint width, depth and condition
- The product specified
- Any access equipment needed
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What we need to price the job
However big the job, these details speed things up:
- The postcode of the building
- The type of building and who uses it
- Anything awkward about access or site hours
- Asbestos survey details if the building is older
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, phone 01277 525 020 or email the details over.
Common questions from Fulwell clients
Do you take on work at healthcare sites like Teddington Memorial Hospital?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Can you work at a site such as Hampton Hill Business Park, by Fulwell?
Yes, sites like Hampton Hill Business Park are within our area, along with the rest of Fulwell. A few photographs and the unit address let us price the work.
Is fire stopping in Scotland covered by different guidance?
Scotland sets its own building regulations, with Technical Handbooks, and England uses Approved Document B. Either way, we install the specified sealant to its tested detail.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We will confirm the products and details used.
Will you write the fire-stopping specification?
No, we don’t design fire stopping. Once you have a specification, we can price and install the sealant elements of it, and tell you if a detail needs another product.
Do you have third-party installer accreditation for fire stopping?
No, and we’d rather be clear about that. Third-party schemes aren’t a legal requirement, but many clients and main contractors ask for them, so check your contract first. Where it isn’t required, we install the specified sealant to the maker’s details.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Why act early in Fulwell
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Failed sealant in a building in Fulwell can quickly affect neighbours, tenants or the floor below. Putting it right early is less disruptive than dealing with the consequences.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
What you get with us
- A Constructionline member, so easy to vet
- Commercial sealant work since 2005
- CHAS accredited
- Our applicators hold CSCS cards
See how commercial sealant jobs are priced or our accreditations.
Keeping the joints sound
To get the most from the new sealant:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask which product is in place before decorating
- Foam or ordinary sealant is never a fire-seal repair
- Have penetrations checked while they can still be seen
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
Our process
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, and the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. The ULEZ covers the whole of Greater London, and parking near a job is rarely simple. Let us know about any on-site parking or loading arrangements when you send the job details.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Tell staff and tenants when we will be in
- Share the asbestos register for older buildings
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Related advice
What sealant work can’t fix
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Fire doors, dampers or other fire safety equipment
- Openings that need collars, wraps, batts or boards rather than sealant
- Issuing fire ratings or certificates for seals
If in doubt, phone 01277 525 020 or send details through our quote form and we will say what we think before you book.
Where we work in Fulwell
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
Fire-rated sealing for Fulwell buildings
With tenants changing and fit-outs following, London buildings see service routes altered again and again. We install fire-rated sealant where it is specified and work within the building manager’s permit system. There are a good number of hotels within about 2 miles of Fulwell. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product.
Tenant changes at parks like Hampton Hill Business Park, 0.5 miles south-west of Fulwell, bring new data and services, and openings through fire-resisting walls need the specified seal. In a retail centre such as Ivybridge Retail Park, 1.8 miles to the north of Fulwell, any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail. Campus buildings at universities such as St Mary's University (0.6 miles east of Fulwell) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified.
Fulwell is about 1 mile south of Twickenham, in Greater London. If you’re looking for fire stopping in Fulwell, we can help. Fulwell is one of 764 places we cover in Greater London for service penetrations. London is covered too, around 12 miles from Fulwell.
We cover the TW11, TW2 and TW12 postcode districts. Streets here include Mays Road, Royal Road and Grove Road. Main routes into Fulwell include the A311 and A313, useful when we plan access and materials. Close to Fulwell, our area also takes in Strawberry Hill (1 mile north-east), Hampton Hill (1 mile south-west), Teddington (1 mile south-east), Twickenham (1 mile north) and Whitton (1 mile north). Nearby towns on our patch include London (12 miles east), City of Westminster (10 miles north-east), Marylebone (10 miles north-east), Kensington (8 miles north-east), St Pancras (12 miles north-east) and Shoreditch (13 miles north-east).
Around Fulwell
We work on buildings around Pope's Grotto pub, Thames Valley Grammar School and Waldegrave School and the streets around them. Fulwell has its own railway station: Fulwell station. Nearby you will also find Treaty Centre (2.4 miles north) and Teddington Memorial Hospital (0.7 miles south-east). For a walk, there’s Kew Gardens Lake and Ham Lands.