Fire stopping in Etteridge
Fire-rated and intumescent sealing of service penetrations and linear gaps in Etteridge and across Highland. CHAS accredited and fully insured, with a 12-month guarantee.
- Open linear gaps along the top of fire-resisting walls
- Fire-rated sealant that has cracked or shrunk back
- Hidden openings found during inspections
Fire stopping for businesses in Etteridge
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What happens if it’s left?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Early resealing prevents it.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why choose Mastic Doctor in Etteridge
- Work carried out by CSCS-carded applicators
- Products installed to the manufacturer’s instructions
- Fixed quotes based on photos, drawings or a visit
- Sealing commercial buildings since 2005
Read our cost guide and our accreditations.
Fire stopping in Etteridge, done properly
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. Most enquiries involve fire sealant pulled out of the opening and snag lists that include open service penetrations, across linear gaps at wall heads, cable penetrations and service gaps in risers. A specialist sealant contractor works differently from a general builder: on jobs in Etteridge, preparation and product choice get the time they need.
In smaller Scottish places like Etteridge, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Place
- Etteridge (PH20)
- Wider area
- Highland
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to Etteridge
Also in Etteridge
Etteridge: questions and answers
Will you design a fire-stopping scheme for our building in Etteridge?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
How do the Scottish rules apply to fire-rated sealing in Etteridge?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Can the building stay open while you work?
Typically, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact.
How do you choose the sealant?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Our process
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. For a building near Etteridge, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Move anything stored against the joints
- Let us know about inductions and permits
- For older buildings, check the asbestos register before work
Quotes
For a fixed quote, call the office on 01277 525 020 or email the details over. You can also send details through our quote form.
Read more
Compartments and services around Etteridge
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Around Etteridge, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Etteridge is about 32 miles south of Inverness, in Highland. We send applicators to Etteridge for service penetrations. Our Highland coverage takes in 256 places, from busy centres to rural villages. Sites around Dundee have their own page, roughly 58 miles from Etteridge.
We take on service penetrations across the PH20 postcode area, for business premises of every kind. Sites close to Etteridge are covered too, including Newtonmore (4 miles north), Laggan (4 miles west), Gergask (5 miles west), Dalwhinnie (6 miles south-west) and Kingussie (7 miles north-east). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
Near you in Etteridge
Etteridge’s nearest station is Newtonmore station, roughly 4 miles north-east. Nearby you’ll also find Cluny Castle (2.7 miles west). Not far away are Loch Cuaich and Creag Bhuidhe.
Quoting for work in Etteridge
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- Travel to remote or island sites
- Site requirements such as inductions and permits
- The size and state of each joint
- Whether the work must be split into stages
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- A wide shot and a close-up of the area
- The site address and postcode
- How the joints are reached, and at what height
- Specification clauses that apply
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Do you need fire stopping in Etteridge?
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
These are often picked up first by site or facilities staff:
- Service penetrations left open after M&E works
- Unsealed penetrations discovered above suspended ceilings
- Old intumescent sealant that has split away
- Builders’ foam or ordinary silicone in compartment walls
For any site around Etteridge, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer.
What to look for in a quote
- How they’ll work around occupants
- Which product they’ll use, and why it suits the joint
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How the existing material will be dealt with
When to bring in a specialist
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
When it isn’t the sealant
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Reviewing a building’s overall fire safety
- Deciding what a wall or floor needs, which belongs to the designer
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, call the office on 01277 525 020 or send details through our quote form and we’ll say what we think before you book.
What we seal
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors