Fire stopping in Elvetham Heath
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Elvetham Heath. Send details for a fixed quote.
- Old intumescent sealant that has split away
- Fire stopping installed outside its tested range
- Unsealed openings around new pipes and cables
Fire stopping in Elvetham Heath
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Elvetham Heath
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal, not a rule of thumb. We work on cable penetrations, joints between fire-resisting walls and floors and pipe penetrations, and what we’re called in for most is open linear gaps along the top of fire-resisting walls and hidden openings found during inspections. Searching for sealant specialists in Elvetham Heath? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Around smaller places like Elvetham Heath, many commercial buildings are conversions or extensions of older ones, so the wall or floor a service passes through isn’t always what the drawings assume. The right product depends on the wall or floor and the services passing through, and we will tell you if the detail calls for something other than sealant.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Elvetham Heath (GU51)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Looking after the joints
For the best life from the joints:
- Check risers and ceiling voids after each round of works
- Keep product data and details in the fire safety file
- Foam or ordinary sealant is never a fire-seal repair
- Have penetrations checked while they can still be seen
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts.
What affects the price in Elvetham Heath
Quotes vary with the job. It mainly depends on:
- The size and state of each joint
- Any access equipment needed
- The site’s rules and procedures
- The product specified
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Before you send an enquiry
A few photos plus some basic facts will normally do. It helps to include:
- Whether an asbestos survey exists
- Any specification or named product
- Your programme or deadline
- Rough lengths or quantities, or drawings if you have them
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Common questions from Elvetham Heath clients
Does your area include sites such as Avondale Business Centre, near Elvetham Heath?
Yes. Our area takes in Elvetham Heath and its surroundings, with estates and business parks such as Avondale Business Centre included. A few photographs and the unit address let us price the work.
Is Elvetham Heath too small for you to travel to?
No. Places such as Elvetham Heath are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Will you sign off the seals for us?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. We work to the specification and the manufacturer’s installation guidance.
Is the BS 476 change in 2029 relevant to fire stopping?
For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence. Scotland follows its own Technical Handbook, including clause 2.1.14 on service penetrations.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
How long does a typical visit take?
That varies with the scale of the job, though a typical visit normally takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we’ll set out a timescale with the quote.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
How a job runs
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before the next one starts. For a site in Elvetham Heath, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Warn occupants and staff about the work
- Let us know about inductions and permits
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call 01277 525 020 or email the details over.
Read more
When something else is needed
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Openings that need collars, wraps, batts or boards rather than sealant
- Signing off or certifying a building’s fire stopping
- Fire risk assessments, a job for a competent assessor
If in doubt, phone 01277 525 020 or send photos by email and we’ll say what we think.
Joints and surfaces we work on
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
Where services cross fire walls in Elvetham Heath
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Elvetham Heath is about 36 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Office fit-outs on sites such as Avondale Business Centre (to the south-east of Elvetham Heath) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. Large healthcare estates like Fleet Community Hospital, under half a mile south of Elvetham Heath, change their services often, so penetration seals are worth checking after M&E work. In a hotel such as Lismoyne Hotel, which lies south-east of Elvetham Heath, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Elvetham Heath is about 1 mile north-west of Fleet, in Hampshire. Commercial clients in Elvetham Heath use us for work on service penetrations, as part of our coverage of Hampshire. Our Hampshire coverage takes in 723 places, large and small. We also cover Reading, around 12 miles from Elvetham Heath.
We cover the GU51 postcode districts for service penetrations. We cover commercial and managed buildings on Kingsley Square, West Tisbury Close and Whitchurch Road. Just outside Elvetham Heath, we also work in Elvetham (1 mile west), Fleet (1 mile south-east), Crookham Village (2 miles south), Winchfield Hurst (2 miles south-west) and Dogmersfield (2 miles south-west). Bigger towns within reach include Basingstoke (11 miles west), Farnborough (4 miles east), Aldershot (5 miles south-east), Alton (11 miles south-west), Yateley (3 miles north) and Tadley (13 miles west).
Around Elvetham Heath
We work on buildings around De Havilland Arms, Calthorpe Park School and Stockton House School. For rail, the closest station is Fleet station, about 0.9 miles east of the centre. Nearby you will also find Fleet Community Hospital (less than half a mile south) and West Green House Agricultural Museum (3.5 miles west). For a walk, there’s Aunt's Pool and Fleet Pond Nature Reserve.
Different surfaces, different methods
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed and the installation has to fit inside those limits.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance.
Also near Elvetham Heath
What else we do in Elvetham Heath
Why deal with it now?
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product. A failed joint lets water into a building whatever its size. Early resealing avoids the damage that follows a leak.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
Why appoint us
- A fixed quote before work starts
- Commercial sealant work since 2005
- Public liability insurance in place
- One number for every site we cover
Take a look at how commercial sealant jobs are priced and how we’re accredited.