Fire Stopping in Ebernoe
Work needed on a service penetration in Ebernoe? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Unsealed openings around new pipes and cables
- Improvised or mixed-product fire seals
- Non-fire-rated filler around services
Fire stopping in Ebernoe
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
About our fire stopping in Ebernoe
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or email drawings and photos with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. We work on small duct penetrations where the tested detail allows, pipe penetrations and linear gaps at wall heads, and the usual reasons a site gets in touch are non-fire-rated filler around services and old intumescent sealant that has split away. A specialist sealant contractor works differently from a general builder: on jobs in Ebernoe, preparation and product choice get the time they need.
Around smaller places like Ebernoe, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- Ebernoe (GU28)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Service penetrations in Ebernoe buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Ebernoe lies roughly 39 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
Older community buildings such as Holy Trinity Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Industrial units on estates such as Colhook Industrial Park. (to the south-west of Ebernoe) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Ebernoe is about 13 miles west of Horsham, in West Sussex. Commercial clients in Ebernoe use us for work on service penetrations. 373 places across West Sussex fall within our area, Ebernoe among them. For work in that direction, see our Portsmouth page.
We cover the GU28 postcode districts. If your building is just outside Ebernoe, we cover Northchapel (2 miles north-west), Lurgashall (2 miles west), Shillinglee (3 miles north), Lickfold (3 miles west) and Ramsnest Common (4 miles north-west). Nearby towns on our patch include Horsham (13 miles east), Storrington (11 miles south-east), Billingshurst (7 miles east), Roffey (14 miles east), Yapton (15 miles south) and Southwater (12 miles east).
Near you in Ebernoe
Other landmarks nearby include Haslemere and District Hospital (5.3 miles north-west) and Lodsworth Castle (4.9 miles south-west). Not far away are Shillinglee Lake and Blackdown.
Diagnose, treat, sign off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. For a building around Ebernoe, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Agree which areas must stay open
- Make sure the joints can be reached
- Let building users know which areas are affected
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Related advice
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Common questions from Ebernoe clients
Can you work at a site such as Colhook Industrial Park., by Ebernoe?
Yes. Our area takes in Ebernoe and its surroundings, with estates and business parks such as Colhook Industrial Park. Included. Photos and a short description are enough for a first look.
Is a smaller place like Ebernoe outside your area?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
What changes on 2 September 2029?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes, subject to the Government’s transitional arrangements. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
What happens if it’s left?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is typically a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. For buildings around smaller places like Ebernoe, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a quote when you are ready.
What you get with us
- One contact handling all your sites
- Public liability insurance in place
- A fixed quote before work starts
- Health and safety: CHAS accredited
Signs you need fire stopping in Ebernoe
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it and has to be removed.
Look out for the following:
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
- Fire seals cut back for extra cables and never reinstated
- Head-of-wall gaps with no fire seal
Wherever services are added at a hospital such as Haslemere and District Hospital (to the north-west of Ebernoe) the compartment line has to be made good with the specified product.
Comparing quotes
- How they handle RAMS and site documents
- How joint depth will be controlled
- Is the sealant right for the movement and the substrate?
- Their plan for phasing and protecting the area
Looking after the joints
Once the work is signed off, these steps help:
- Check with the data sheet before painting over fire sealant
- Put resealing into every M&E and fit-out package
- File the specified details where the next contractor can find them
- Get seals inspected before ceilings and boxing close
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way, or a new specification from the designer.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there, not months later.