The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Fire Stopping in East Worldham

Fire-rated and intumescent sealing of service penetrations and linear gaps throughout East Worldham and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.

  • Openings left by services added after handover
  • Unsealed joints where partitions meet the slab
  • Fire sealant pulled out of the opening
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
Constructionline member
£5m PL insurance

Fire stopping across East Worldham

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Fire stopping for commercial buildings in East Worldham

Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you are dealing with unsealed penetrations discovered above suspended ceilings and improvised or mixed-product fire seals, we can put it right, whatever the surface. Whoever orders the work in East Worldham, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.

Smaller places such as East Worldham still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.

A 12-month guarantee applies to all our work in Hampshire. Should something we installed fail, speak to us on 01277 525 020 or send details through our quote form and we will come back to it.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
East Worldham (GU34)
Region
Hampshire
Cover
12 months on our workmanship
Quotes
Fixed quote, scope in writing
Phone
01277 525 020
Page updated
3 November 2026

Different surfaces, different methods

Masonry and concrete

Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point so we know it sits within the tested range, and any outside it are raised with you.

Metal pipes

Sealant details often cover copper and steel pipework. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail.

Where services cross fire walls in East Worldham

East Worldham is about 44 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.

On a hospital site such as Alton Community Hospital, 2.5 miles west of East Worldham, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. On estates like Kerridge Industrial Estate (1.9 miles north-west of East Worldham), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal.

East Worldham is about 2 miles south-east of Alton, in Hampshire. Across the GU34 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. 723 places across Hampshire fall within our area, including East Worldham. Sites around Reading have their own page, about 22 miles away.

Commercial sites across GU34 are covered. Among the streets we cover are Caker's Lane, Shelleys Lane and Wyck Lane, and sites on any of them can send details for a fixed quote. Just outside East Worldham, we also work in Wyck (1 mile north-east), Hartley Mauditt (1 mile south), Neatham (2 miles north), Holybourne (2 miles north) and Oakhanger (2 miles south-east). Nearby towns on our patch include Basingstoke (11 miles north-west), Farnborough (13 miles north-east), Fleet (10 miles north-east), Aldershot (11 miles north-east), Petersfield (9 miles south) and Yateley (15 miles north).

Near you in East Worldham

The nearest railway station is Alton station, about 1.8 miles north-west. Other landmarks nearby include Alton Community Hospital (2.5 miles west) and Allen Gallery (2.1 miles north-west). The countryside around East Worldham includes Deadwater Valley and Selborne Hill.

Map of East Worldham © OpenStreetMap contributors

East Worldham: questions and answers

Can you work at a site such as Kerridge Industrial Estate, by East Worldham?

Yes. We cover East Worldham and the area around it, including industrial estates, business parks and retail parks such as Kerridge Industrial Estate. Photos and a short description are enough for a first look.

Can you work on a hospital site such as Alton Community Hospital?

Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.

Can weather delay the job?

It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.

Can you quote from photographs?

That depends on the size and complexity of the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.

Do you take on small jobs?

Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.

How do I request a quote?

The quote form is the simplest route, though you can also speak to us on 01277 525 020 or send details through our quote form. Include photographs or drawings if you have them.

Do you design or specify fire stopping?

No, we don’t design fire stopping. Once you have a specification, we can price and install the sealant elements of it, and tell you if a detail needs another product.

What happens if it’s left?

A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. For buildings around smaller places like East Worldham, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.

The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.

Why choose Mastic Doctor in East Worldham

  • Clear, fixed quotes
  • Fully insured
  • CSCS-carded applicators
  • One phone line for London, the South East and Scotland

Take a look at our cost guide or how we’re accredited.

Should maintenance staff do it?

For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

Diagnose, treat, sign off

Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For work around East Worldham, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.

  1. We start with your penetration schedule, drawings or specification.
  2. Access, permits and the order of areas are agreed with the site team.
  3. We compare every service penetration with its tested detail before sealing.
  4. Foam, ordinary sealant and debris come out.
  5. The specified backing and sealant go in to depth and are finished neatly.
  6. We tell you about openings that need a different product.

Before we start on site

  • Tell us which areas need to stay in use
  • Explain the parking and delivery arrangements
  • Send asbestos survey details if the building is pre-2000

Quotes

Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.

Get a price

Advice

Do you need fire stopping in East Worldham?

Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls and later need putting right.

Things that usually lead to an enquiry:

  • Service penetrations left open after M&E works
  • Fire-rated sealant that has cracked or shrunk back
  • Fire stopping installed outside its tested range
  • Snag lists that include open service penetrations

Holiday works at schools like Eggar's School often leave service openings to seal before pupils return.

Questions to ask before you book

  • How the existing material will be dealt with
  • Their approach to joint depth and backing
  • Whether primer will be used where the manufacturer specifies it
  • Which product they’ll use, and why it suits the joint

Questions to ask before you appoint anyone

Cost factors for service penetrations

Before we quote, we look at:

  • Travel to remote or island sites
  • How much there is to seal
  • Any access equipment needed
  • Working within restricted access windows

Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.

Before you send an enquiry

It doesn’t need to be a full survey. These details are enough to start:

  • Drawings or a marked-up plan, if available
  • Whether the building will be occupied during the work
  • Access details, including height
  • The product your specification calls for

To get a fixed quote, give us a call on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.

Accreditations

Trusted. Accredited. Insured.