
Fire stopping in East Wellow
Planning work on a service penetration in East Wellow? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Service penetrations left open after M&E works
- Unsealed penetrations discovered above suspended ceilings
- Fire seals cut back for extra cables and never reinstated
Fire stopping across East Wellow
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in East Wellow
Facilities managers in East Wellow often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. Most enquiries involve openings found when ceilings come down for a refit and unsealed joints where partitions meet the slab, on service gaps in risers, pipe penetrations and cable penetrations. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in East Wellow it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Smaller places such as East Wellow still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, speak to us on 01277 525 020 or send details through our quote form and we will arrange a return visit.
- Place
- East Wellow (SO51)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026

When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Also near East Wellow
Other services in East Wellow
Do you need fire stopping in East Wellow?
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Common reasons buildings call us in:
- Fire stopping installed outside its tested range
- Snag lists that include open service penetrations
- Hidden openings found during inspections
- Openings left by services added after handover
At a healthcare site like Tatchbury Mount Hospital (3 miles south-east of East Wellow), new services through compartment walls are a constant, and each needs the specified seal.
What your quote should include
- Their plan for phasing and protecting the area
- Their pre-qualification and accreditations
- How the existing material will be dealt with
- How long is the guarantee, and what does it include?
Why it’s worth doing now in East Wellow
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme. For buildings around smaller places like East Wellow, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What you get with us
- A Constructionline member, so easy to vet
- Old sealant cut out, never sealed over
- Products installed to the manufacturer’s instructions
- Health and safety: CHAS accredited
See our cost guide or how we’re accredited.
Questions we are asked in East Wellow
How does the move away from BS 476 affect penetration seals in East Wellow?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Is Shelley Farm Industrial Estate, near East Wellow, within your area?
Yes. We cover East Wellow and the area around it, including industrial estates, business parks and retail parks such as Shelley Farm Industrial Estate. Photos and a short description are enough for a first look.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Do you offer coloured sealant?
It depends on the product. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
How many days will you need on site?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
What sets the cost
To price the job, we consider:
- Location, for remote and island sites
- Access and working height
- Whether old sealant has to be cut out first
- The total length or number of joints
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Before you send an enquiry
A few photos plus some basic facts will normally do. Please tell us:
- Access details, including height
- Asbestos survey details if the building is older
- A wide shot and a close-up of the area
- What the building is and how it’s used
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or speak to us on 01277 525 020 or email the details over if you’d rather talk the job through.
From enquiry to sign-off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. Rural sites near East Wellow may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Send your site hours and access windows
- Make sure the joints can be reached
- Flag any permit to work we’ll need
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or send photos by email with what you know.
Read more
Fire stopping around East Wellow: how the place shapes the job
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a unit at a site such as Shelley Farm Industrial Estate, 1.2 miles south-east of East Wellow, new power or data runs between office and warehouse can breach a compartment wall. For a building such as Church of St Margaret, new heating or data runs are the usual reason penetrations need sealing.
East Wellow is about 4 miles south-west of Romsey, in Hampshire. Anywhere in SO51, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. 723 places across Hampshire fall within our area, including East Wellow. Our Southampton page has more on work in that area, about 8 miles away.
We cover the SO51 postcode districts. If your site is on Fielders Way, Crosfield Close and The Drive or close by, send details and we will quote for service penetrations. We also cover Blackhill (1 mile south-west), West Wellow (1 mile north-west), Canada (1 mile west), Wigley (2 miles south-east) and Ower (2 miles south-east). Nearby towns on our patch include Winchester (13 miles north-east), Eastleigh (10 miles east), Totton (4 miles south-east), Chandler's Ford (8 miles east), Hedge End (12 miles east) and Lymington (15 miles south).
Landmarks near East Wellow
Recent enquiries here include premises near Embley. East Wellow’s nearest station is Romsey station, about 3.6 miles north-east of the centre. Well-known places in the area include Tatchbury Mount Hospital (3 miles south-east) and King Johns House (3.3 miles north-east). For a walk, there’s Copythorne Common.
Maintenance after handover
A few simple habits keep the new joints working:
- Check risers and ceiling voids after each round of works
- Keep general-purpose fillers away from compartment walls
- Agree the fire-stopping specification before services go in
- Record which product was used where
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small.