Fire stopping in East Harting
Work needed on a service penetration in East Harting? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Seals disturbed by maintenance and left open
- Openings left by services added after handover
Need fire stopping in East Harting?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in East Harting
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. We work on joints between fire-resisting walls and floors, cable penetrations and small duct penetrations where the tested detail allows, and the usual reasons a site gets in touch are openings left by services added after handover and seals disturbed by maintenance and left open. For commercial sealant work in East Harting, you deal with one contact from quote to sign-off, whether it’s one building or several.
Barn and farm-building conversions near places like East Harting often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- East Harting (GU31)
- Region
- West Sussex
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Fire stopping around East Harting: points for this area
Central London is about 49 miles from East Harting. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Halls and meeting rooms at places like The Parish Church of St Mary & St Gabriel sometimes gain new services, and any compartment wall crossed needs the specified seal. Large healthcare estates like Petersfield Community Hospital, 4.1 miles north-west of East Harting, change their services often, so penetration seals are worth checking after M&E work. For a school such as Harting CofE Primary School, penetration sealing fits best at the end of the summer works.
East Harting is about 4 miles south-east of Petersfield, in West Sussex. If you are looking for fire stopping in East Harting, we can help, as we do across West Sussex. East Harting is one of 373 places in West Sussex on our list for service penetrations. For work in that direction, see our Portsmouth page (15 miles or so).
We cover the GU31 postcode districts for service penetrations. Streets here include Hollist Lane, East Harting Street and Orchard Close, and sites on any of them can send details for a fixed quote. We also cover South Harting (1 mile west), Nyewood (1 mile north), Elsted (1 mile east), Elsted Marsh (2 miles east) and Dumpford (2 miles north-east). Nearby towns on our patch include Bognor Regis (15 miles south-east), Chichester (10 miles south), Portfield (10 miles south-east), Yapton (15 miles south-east), East Wittering (14 miles south) and Nyetimber (15 miles south-east).
Local landmarks in East Harting
Recent enquiries here include premises near The Ship Inn, among other places. The nearest railway station is Petersfield station, about 4.1 miles north-west of the centre. Nearby you will also find Bear Museum (3.7 miles north-west) and Petersfield Community Hospital (4.1 miles north-west). Green spaces nearby include Iping and Stedham Commons and Oakham Hill.
Questions we’re asked in East Harting
How does the move away from BS 476 affect penetration seals in East Harting?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is East Harting too far out for you?
Not at all. East Harting is within our area. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
How many days will you need on site?
It depends on the scope, though a typical visit usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we will set out a timescale with the quote.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Aftercare for building managers
After handover, these steps help:
- Check with the data sheet before painting over fire sealant
- Ask the designer to confirm details early on refits
- Have penetrations checked while they can still be seen
- Put resealing into every M&E and fit-out package
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.
What we can’t put right
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Large openings beyond what any sealant detail covers
- Fire doors, dampers or other fire safety equipment
- Signing off or certifying a building’s fire stopping
If in doubt, speak to us on 01277 525 020 or send photos by email and we’ll say what we think before you book.
What we seal
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
Surface by surface
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement, along the full length of the run.
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening.
How the quote is worked out
To price the job, we consider:
- The total length or number of joints
- Which sealant the job calls for
- Access and working height
- The site’s rules and procedures
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Details that help us quote
Diagnosis starts before we arrive. Let us know:
- Whether an asbestos survey exists
- Any specification or named product
- Whether the building will be occupied during the work
- Anything awkward about access or site hours
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
When to bring in a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Nearby places to East Harting
Other services in East Harting
Diagnose, treat, sign off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Jobs in and around smaller places like East Harting are usually planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Tell staff and tenants when we’ll be in
- Tell us your opening times and when work is allowed
- Agree which areas must stay open
Quotes
To get a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings. You can also send details through our quote form.