Fire Stopping in Dunkeld
Need fire stopping in Dunkeld? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Hidden openings found during inspections
- Fire seals cut back for extra cables and never reinstated
- Head-of-wall gaps with no fire seal
Need fire stopping in Dunkeld?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Dunkeld
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate and we’d rather say that up front. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. We work on pipe penetrations, cable penetrations and small duct penetrations where the tested detail allows, and what we are called in for most is non-fire-rated filler around services and open linear gaps along the top of fire-resisting walls. Looking for mastic applicators who cover Dunkeld? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
For a building near Dunkeld, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our workmanship is guaranteed for 12 months, in Dunkeld as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Location
- Dunkeld (PH8)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When to call us in Dunkeld
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint, and the wrong product can split as a result. The tested detail for a linear joint states the width and movement it covers.
These are often picked up first by site or facilities staff:
- Fire-rated sealant that has cracked or shrunk back
- Seals that don’t match their tested detail
- Snag lists that include open service penetrations
- Hidden openings found during inspections
Where a unit on an estate such as Cally Industrial Estate, which lies north of Dunkeld, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Before you book anyone
- Can the work be phased to keep areas open?
- How they handle RAMS and site documents
- Will failed sealant be removed rather than covered?
- Their pre-qualification and accreditations
Diagnose, treat, sign off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and we clear our waste as we work. For a building near Dunkeld, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Before we start on site
- Agree which areas must stay open
- For older buildings, check the asbestos register before work
- Make sure the joints can be reached
Get a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, call 01277 525 020 or use the quote form.
Advice
What sealant work can’t fix
Not every problem is a sealant problem, and we’re upfront when that’s the case. It won’t fix:
- Walls or floors that aren’t fire-resisting to begin with
- Approving the work on behalf of building control
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can call 01277 525 020 or email drawings and photos and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Aftercare for building managers
Once the work is signed off, these steps help:
- Flag new cables with no seal around them
- Brief every trade that openings they make must be sealed
- Settle who seals which penetrations at the start of a project
- Ask which product is in place before decorating
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
Also in Dunkeld
Fire stopping in Dunkeld: the local picture
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Dunkeld has several hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product.
Hotels such as Perth Arms Hotel (less than half a mile north-east of Dunkeld) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Dunkeld is about 10 miles west of Blairgowrie and Rattray, in Perth and Kinross. Commercial clients in Dunkeld can call on us for service penetrations. Dunkeld is one of 114 places in Perth and Kinross on our list. We also cover Dundee, around 24 miles from Dunkeld.
If you need fire stopping in PH8, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on High Street, The Cross and St Ninian's Wynd or nearby, we can quote for service penetrations. We also cover Little Dunkeld (1 mile south-east), Birnam (1 mile south-east), Inchmagrannachan (2 miles north-west), Dowally (4 miles north-west) and Middleton (4 miles south-east) for service penetrations. A short drive away, we cover Perth (13 miles south-east), Blairgowrie and Rattray (10 miles east), Letham (12 miles south), Scone (12 miles south-east), Pitlochry (11 miles north-west) and Tulloch (11 miles south-east).
Around Dunkeld
In Dunkeld, that means premises near The Hermitage and Perth Arms Hotel. The closest station to Dunkeld is Dunkeld & Birnam station, roughly 0.7 miles south-east. Nearby you will also find Murthly Castle (3.3 miles south-east) and Scottish Horse Regimental Museum (less than half a mile west). Green spaces nearby include Loch of Craiglush and Birnam Hill.
Questions we are asked in Dunkeld
Can you work at a site such as Cally Industrial Estate, by Dunkeld?
Yes. We cover Dunkeld and the area around it, including industrial estates, business parks and retail parks such as Cally Industrial Estate. A few photos and the unit address let us price the work.
Is a smaller place like Dunkeld outside your area?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
Do you seal openings left by new services?
Yes. Share the penetration schedule and product details for a fixed quote. We can follow the services contractor floor by floor so areas aren’t left open.
Which standards are fire seals tested to?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. EI 60 means integrity and insulation for 60 minutes in the tested arrangement.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
Do you work in Scotland as well as England?
Scotland sets its own building regulations, with Technical Handbooks, and England uses Approved Document B. Either way, we install the specified sealant to its tested detail.
How the quote is worked out
These are the things that shape the price:
- Access and working height
- Distance, for remote addresses
- Induction, permit and paperwork requirements
- Joint width, depth and condition
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site rules also count.
Details that help us quote
Whether it’s one area or a whole building, the same details help:
- Clear photographs of the problem areas
- Whether the building will be occupied during the work
- The product your specification calls for
- The asbestos register, for older buildings
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or email us with what you know.