Fire Stopping in Dial Post
Fire-rated and intumescent sealing of service penetrations and linear gaps in Dial Post. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Old intumescent sealant that has split away
- Snag lists that include open service penetrations
- Hidden openings found during inspections
Fire stopping for businesses in Dial Post
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Dial Post, done properly
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, call the office on 01277 525 020 or email drawings and photos with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. If you are dealing with fire stopping installed outside its tested range and fire seals cut back for extra cables and never reinstated, we can help, on small duct penetrations where the tested detail allows, cable penetrations and joints between fire-resisting walls and floors alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Dial Post, that means joint design, primers and backing rod as standard.
Around smaller places like Dial Post, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Dial Post (RH13)
- Region
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For a building around Dial Post, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
- Let building users know which areas are affected
Get a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Advice
Towns and villages near Dial Post
Other services in Dial Post
Looking after the joints
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Record which product was used where
- Ask which product is in place before decorating
- Ask the designer to confirm details early on refits
- Arrange inspection before areas are covered up
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
When to bring in a specialist
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Your questions answered
Is Dial Post too far out for you?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
What happens to BS 476 references for fire stopping in Dial Post?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Can you quote from photos?
It depends on the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Do you offer coloured sealant?
It depends on the product specified. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Fire-rated sealing for Dial Post buildings
Dial Post is about 39 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product. Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Around Dial Post, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product. Office fit-outs on sites such as Pondtail Farm (Business Park) (2.2 miles north of Dial Post) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Dial Post is about 7 miles south of Horsham, in West Sussex. We send applicators to Dial Post for service penetrations. Dial Post is one of 373 places in West Sussex on our list for service penetrations. Sites around Brighton have their own page, roughly 13 miles from Dial Post.
We take on service penetrations across the RH13 postcode area, for business premises of every kind. For a building on The Green, Swallows Lane and Bentons Lane or nearby, send details and we’ll quote for service penetrations. We also cover Whitehall (2 miles north-west), Shipley (2 miles north), West Grinstead (2 miles north-east), Broomer's Corner (2 miles north-west) and Partridge Green (2 miles east) for service penetrations. A short drive away, we cover Crawley (13 miles north-east), Horsham (7 miles north), Worthing (10 miles south), Haywards Heath (12 miles east), Burgess Hill (10 miles east) and Littlehampton (13 miles south-west).
Around Dial Post
Open spaces near Dial Post include Knepp Wildland and Chanctonbury Hill.
Why deal with it now?
An unsealed opening affects more than fire safety: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. Halls, stores and units around places like Dial Post may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why us?
- CHAS accredited
- A Constructionline member, so easy to vet
- Products installed to the manufacturer’s instructions
- Joints cleaned back to sound surfaces
Take a look at our cost guide and our accreditations.
Commercial clients in Dial Post
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
When something else is needed
Some faults sit outside our scope, and we say so rather than covering them up:
- Construction that lacks the fire resistance the seal relies on
- Issuing fire ratings or certificates for seals
- Large openings beyond what any sealant detail covers
If in doubt, ring 01277 525 020 or email the details over and we will say what we think.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Service gaps in risers