The Mastic Doctor team standing beside their branded vans outside an office building
West Sussex · England

Dial Post construction mastic

We carry out mastic packages for new-build and refurbishment projects in Dial Post. Send photos or drawings for a fixed quote.

  • Snag items on joints that need redoing before handover
  • Different trades sealing to different standards
  • Oversized or tapered gaps around new frames
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
12-month guarantee on our workmanship.
South East, London & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Need construction mastic in Dial Post?

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Construction mastic for commercial buildings in Dial Post

Mastic tends to be one of the final packages before handover, which puts it right on the critical path. Mastic Doctor takes on mastic packages for main contractors and developers on schemes in Dial Post, following the trades through the building as rooms and elevations become ready. Site teams most often ask us about oversized or tapered gaps around new frames and mastic snags holding up handover, across brick and block movement joints, cladding and panel joints and internal decorators’ caulk. Looking for mastic applicators who cover Dial Post? We have been sealing commercial buildings since 2005.

Conversions of older rural buildings near smaller places such as Dial Post bring stone, flint, brick and timber up against new glazing. A product that grips an irregular face, with a colour that suits the building’s character, is normally what’s needed.

The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.

The Mastic Doctor team beside their liveried vans in front of an office building
Location
Dial Post (RH13)
Wider area
West Sussex
Cover
A 12-month guarantee
Quote
Quoted before any work starts
Call
01277 525 020
Page updated
3 November 2026

Facades, frames and programmes in Dial Post

At about 39 miles from central London, Dial Post is within reach of the capital. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, and each scheme needs its mastic sealed to programme. The South East is one of the drier parts of the UK. Winter mornings still bring frost and condensation on frames and panels, which is why external dates are agreed with the site manager.

When units on a site such as Pondtail Farm (Business Park) (2.2 miles north of Dial Post) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.

Dial Post is about 7 miles south of Horsham, in West Sussex. If you are looking for construction mastic in Dial Post, we can help. Across West Sussex, 373 places are covered, Dial Post among them. Our Brighton page has more on work in that area.

We cover the RH13 postcode districts. If your site is on The Green, Swallows Lane and Bentons Lane or close by, send details and we will quote for mastic packages. Nearby places we also cover include Whitehall (2 miles north-west), Shipley (2 miles north), West Grinstead (2 miles north-east), Broomer's Corner (2 miles north-west) and Partridge Green (2 miles east) for mastic packages. Nearby towns on our patch include Crawley (13 miles north-east), Horsham (7 miles north), Worthing (10 miles south), Haywards Heath (12 miles east), Burgess Hill (10 miles east) and Littlehampton (13 miles south-west).

Around Dial Post

Green spaces nearby include Knepp Wildland and Chanctonbury Hill.

Map of Dial Post © OpenStreetMap contributors

Doing it in-house

Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.

Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

Why deal with it now?

On a refurbishment, there’s a choice between resealing existing frames and replacing them. Sound frames often need only a new perimeter seal, which is a much smaller cost. We will say so if a frame itself is the problem. For buildings around smaller places like Dial Post, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.

Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.

What you get with us

  • Old sealant cut out, never sealed over
  • A Constructionline member, so easy to vet
  • Colours chosen to suit frames, cladding or finishes where possible
  • Specification-led, product-correct work

Read our cost guide or our accreditations and insurance.

On site: what to expect

The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs in and around smaller places like Dial Post are normally planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.

  1. We price from the drawings, specification and programme you send.
  2. You receive a fixed quote listing scope, products and phasing.
  3. You tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we confirm it with the quote.
  4. Areas are sealed plot by plot or floor by floor as the trades hand them over.
  5. Each joint is prepared, backed to depth and sealed in the product the specification names.
  6. We close out snagging and hand over with a 12-month guarantee.

Preparing the site

  • Let building users know which areas are affected
  • Tell us what induction or permit system the site runs
  • Point out any areas we must not close

Ask for a quote

Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or email drawings and photos.

Ask for a quote

Related advice

For managing agents and facilities managers

When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.

Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.

Keeping the joints sound

Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:

  • Brief the final clean team to avoid blades near sealant
  • Put any product change through the designer first
  • Keep product details for future maintenance
  • Don’t schedule sealing before decorators and flooring are done

After we’ve sealed an area, it helps to keep other trades from damaging the joints. Fresh sealant needs its cure time before it’s cleaned, painted near or knocked, and that time depends on the product, temperature and joint depth.

Leaving the mastic snag list to the end squeezes everyone. A planned close-out through each area as it completes keeps the list short and keeps handover on track.

Do you need construction mastic in Dial Post?

Value-engineered products sometimes end up in the wrong joints. A sealant that isn’t right for the substrate or the movement will fail ahead of time. We use what’s specified, and any substitute goes to you for acceptance.

Things that normally lead to an enquiry:

  • Different trades sealing to different standards
  • Snag items on joints that need redoing before handover
  • Perimeter gaps outside the sealant’s range
  • External joints sealed in damp or cold conditions that are now failing

On any site in or around Dial Post, the mastic follows the specification and the programme.

Questions to ask before you book

  • Will CSCS-carded applicators be on site?
  • Can the work be phased to keep areas open?
  • Will failed sealant be removed rather than covered?
  • Health and safety accreditation such as CHAS

Choosing a commercial sealant contractor

Questions we are asked in Dial Post

Is a smaller place like Dial Post outside your area?

No. Small places get the same service as large ones. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.

Can the mastic package for our job in Dial Post follow the site programme?

Yes. The mastic is planned around your key stages. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.

Can staff carry on working while you’re here?

Yes, as long as we plan it. Tell us your site hours and access windows and we’ll plan around them.

Will you come and look before quoting?

Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit.

What’s the quickest route to a quote?

The quote form is the simplest route, though you can also ring 01277 525 020 or use the quote form. Include photographs or drawings if you have them.

What accreditations do you hold?

CHAS and Constructionline are both in place, and each applicator is CSCS-carded. We are fully insured for public liability.

Will you stick to the specified products?

We work to the specification and the manufacturer’s installation guidance. Preparation, backing and depth follow the product guidance.

Accreditations

Trusted. Accredited. Insured.