Fire Stopping in Cote
Work needed on a service penetration in Cote? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Head-of-wall gaps with no fire seal
- Damaged fire seals in risers and voids
- Fire stopping installed outside its tested range
Fire stopping for Cote sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Cote
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Cote. We work on small duct penetrations where the tested detail allows, pipe penetrations and linear gaps at wall heads, and the usual reasons a site gets in touch are service penetrations left open after M&E works and snag lists that include open service penetrations. Most enquiries from Cote start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a smaller site near Cote, we plan to do all the penetrations in one go, so send the specification and photographs first. Design and sign-off belong to the designer or building control; we install what’s specified.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Cote (BN13)
- Region
- West Sussex
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Penetration seals near Cote
A number of hotels sit less than 2 miles from Cote. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail.
In a school such as Durrington Junior School, fire-rated sealant goes in around service penetrations where it is specified. Workshops and IT rooms at colleges like Worthing College (to the east of Cote) are re-serviced often, leaving penetrations to seal. Office fit-outs on sites such as Gosling Croft Business Centre, 1.3 miles to the west of Cote, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Cote is about 2 miles north-west of Worthing, in West Sussex. Cote sits inside our coverage and the rest of West Sussex, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across West Sussex, 373 places are covered, including Cote. There’s a separate page for Brighton, roughly 13 miles from Cote.
We cover the BN13 postcode districts for service penetrations. Close to Cote, our area also takes in Durrington (1 mile south-east), High Salvington (1 mile north-east), Clapham (1 mile west), Patching (2 miles west) and Findon (2 miles north). Nearby towns on our patch include Bognor Regis (12 miles west), Burgess Hill (15 miles north-east), Littlehampton (5 miles south-west), Shoreham-by-Sea (7 miles east), Lancing (4 miles east) and Rustington (4 miles south-west).
What’s near Cote
Locally, jobs take us to sites close to Durrington High School, Clapham Wood and Palatine Primary School. Cote’s nearest station is Durrington-On-Sea station, roughly 1.8 miles south of the centre. Other landmarks nearby include The Acre (2.8 miles south-east) and Old Castle (1.7 miles south-east). Not far away are Highdown Hill.
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Your questions answered
What happens to BS 476 references for fire stopping in Cote?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Will you take on work at estates like Gosling Croft Business Centre, close to Cote?
Yes. Estates, retail parks and business parks around Cote, Gosling Croft Business Centre among them, are all within reach. A few photos and the unit address let us price the work.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Is Cote in your area?
Yes. Cote falls within our area, and you can call the office on 01277 525 020 or use the quote form to get started.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
What do you charge?
Every job gets its own fixed quote. To get one, call the office on 01277 525 020 or use the quote form with a description of the work.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Aftercare for building managers
A few simple habits keep the new joints working:
- Settle who seals which penetrations at the start of a project
- Check risers and ceiling voids after each round of works
- Record which product was used where
- Leave fire sealant to cure fully before covering it
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Other services in Cote
How a job runs
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact. If others near Cote need work, visits can be combined. You’ll have a fixed quote before work starts.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Warn occupants and staff about the work
- Share your working hours and any access restrictions
- Agree which areas must stay open
Ask for a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Advice
What sealant work can’t fix
Honesty saves time and money. Fresh joints won’t solve:
- Approving the work on behalf of building control
- Walls or floors that aren’t fire-resisting to begin with
- Fire risk assessments, a job for a competent assessor
If you are not sure, just give us a call on 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Cable penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
Cost factors for service penetrations
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Whether old sealant has to be cut out first
- The product specified
- Travel to remote or island sites
- Whether the work must be split into stages
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
What we need to price the job
We can often quote from photos and a few details. It helps to include:
- Drawings or a marked-up plan, if available
- Any dates the work must fit around
- Whether the building will be occupied during the work
- How the joints are reached, and at what height
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to speak to us on 01277 525 020 or email drawings and photos with what you know.