Fire Stopping in Climping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Climping, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Head-of-wall gaps with no fire seal
- Damaged fire seals in risers and voids
- Openings found when ceilings come down for a refit
Fire stopping in Climping
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Climping
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. Site teams most often ask us about damaged fire seals in risers and voids and openings left by services added after handover, across pipe penetrations, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Climping it comes down to the same thing: the right product in a properly prepared joint.
Barn and farm-building conversions near places like Climping often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Climping (BN17)
- Wider area
- West Sussex
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Do you need fire stopping in Climping?
Openings in fire-resisting walls normally appear when services are added or changed. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
Typical triggers for a call:
- Seals that don’t match their tested detail
- Seals disturbed by maintenance and left open
- Open linear gaps along the top of fire-resisting walls
- Old intumescent sealant that has split away
Theatres, wards and plant rooms at sites like Arundel & District Community Hospital (to the north of Climping) all have compartment walls crossed by services.
Comparing quotes
- Is the sealant right for the movement and the substrate?
- How long is the guarantee, and what does it include?
- Will failed sealant be removed rather than covered?
- Who will actually carry out the work
What sets the cost
There’s no standard rate for sealant work, because every site is different. What we take into account:
- Which sealant the job calls for
- How much there is to seal
- Any access equipment needed
- Location, for remote and island sites
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
Details that help us quote
The more we know, the firmer the quote. Helpful details to send:
- Asbestos survey details if the building is older
- When you need the work done
- Clear photographs of the problem areas
- Whether the building will be occupied during the work
To get a fixed quote, phone 01277 525 020 or email the details over with the site address and an outline of the work. Our quote form is another easy route.
On site: what to expect
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before the next one starts. For a building around Climping, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Explain the parking and delivery arrangements
- Share your working hours and any access restrictions
Request a quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Read more
Fire stopping around Climping: what changes locally
The 2 miles around Climping include seven care or nursing homes. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. We install fire-rated sealant to the tested detail where it is specified. Central London is about 52 miles from Climping. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Older community buildings such as The Parish Church of St Mary that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Hotels like Bailiffscourt Hotel & Spa (to the south of Climping) are refurbished in phases, and each phase can open up compartment walls.
Climping is about 2 miles west of Littlehampton, in West Sussex. Any commercial site in Climping is covered. Climping is one of 373 places in West Sussex on our list. Our Brighton page has more on work in that area, about 19 miles away.
Anyone looking for fire stopping in BN17 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include Church Lane, Horsemere Green Lane and Crookthorn Lane, and sites on any of them can send details for a fixed quote. We also cover Horsemere Green (1 mile west), Atherington (1 mile south), Ford (1 mile north), Wick (1 mile north-east) and Tortington (2 miles north) for service penetrations. A short drive away, we cover Worthing (8 miles east), Bognor Regis (5 miles west), Chichester (9 miles west), Selsey (11 miles south-west), Shoreham-by-Sea (13 miles east) and Lancing (11 miles east).
Near you in Climping
Around Climping, our work takes us to commercial buildings near The Littlehampton Academy and The Black Horse Public House and the streets around them. The nearest railway station is Littlehampton station, about 1.2 miles east. Other landmarks nearby include Arundel and District Hospital (3 miles north) and Rustington Museum (3 miles east). Green spaces nearby include WWT Arundel.
Nearby places to Climping
What else we do in Climping
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Writing the fire-stopping specification
- Plastic pipes whose detail calls for a collar or wrap
- Issuing fire ratings or certificates for seals
If in doubt, speak to us on 01277 525 020 or email the details over and we’ll say what we think.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
Your questions answered
Would you work within a site like Arundel & District Community Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
What happens to BS 476 references for fire stopping in Climping?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
Can the building stay open while you work?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Why act early in Climping
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Converted and older buildings near places like Climping tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Health and safety: CHAS accredited
- Fully insured, including public liability cover
- A fixed quote before work starts
- Constructionline member for supplier checks
Take a look at our cost guide and how we’re accredited.