Clap Hill fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Clap Hill and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Old intumescent sealant that has split away
- Builders’ foam or ordinary silicone in compartment walls
- Openings left by services added after handover
Fire stopping near Clap Hill
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Clap Hill, done properly
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance on sites in Clap Hill. The enquiries we see most involve fire seals cut back for extra cables and never reinstated and snag lists that include open service penetrations, on pipe penetrations, cable penetrations and service gaps in risers. One point of contact handles commercial sealant work in Clap Hill from the first photos to the final walk-round, for single jobs and planned programmes alike.
Barn and farm-building conversions near places like Clap Hill often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Place
- Clap Hill (TN25)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Regular inspection catches problems early. In particular:
- Keep general-purpose fillers away from compartment walls
- Put resealing into every M&E and fit-out package
- Check risers and ceiling voids after each round of works
- Record which product was used where
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, so check the product data first.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts.
Quoting for work in Clap Hill
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Any access equipment needed
- Whether old sealant has to be cut out first
- Distance, for remote addresses
- Specialist products, such as fire-rated or hygienic sealants
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a quote when you’re ready.
Sending details for a quote
A few photos plus some basic facts will normally do. It helps to include:
- Your programme or deadline
- The type of building and who uses it
- Photos of the joints, close up and from further back
- The site address and postcode
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Towns and villages near Clap Hill
What else we do in Clap Hill
When it isn’t the sealant
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Signing off or certifying a building’s fire stopping
- Construction that lacks the fire resistance the seal relies on
- Large openings beyond what any sealant detail covers
Not sure which it is? You can call the office on 01277 525 020 or email us and we’ll tell you honestly before you book.
What we seal
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Jobs in and around smaller places like Clap Hill are usually planned as a single visit, so we ask for photos and rough sizes first. Then the right materials arrive with us.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Send your site hours and access windows
- Let building users know which areas are affected
- Point out any areas we must not close
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or email us.
Advice
FAQs: Clap Hill
Is Clap Hill too small for you to travel to?
No. Small places get the same service as large ones. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you cover business parks and estates near Clap Hill, such as Evegate Business Park?
Yes, sites like Evegate Business Park are within our area, along with the rest of Clap Hill. To start, just call the office on 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Can the sealant be colour-matched?
That depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What changes on 2 September 2029?
It mainly affects England, where Approved Document B is dropping its BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence, though transitional rules apply. In Scotland, the Technical Handbook sets its own guidance, including clause 2.1.14 on service penetrations.
Will you sign off the seals for us?
No. Approval sits with the designer, principal designer or building control. We’ll confirm the products and details used, and you can tell us what other records you need at quote stage.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
Why it’s worth doing now in Clap Hill
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Around Clap Hill, it’s better to renew all the failing joints at once. Send photos of each area and we’ll quote for the lot.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why clients in Clap Hill choose us
- Failed material removed, not covered up
- Specification-led, product-correct work
- Fully insured
- Work carried out by CSCS-carded applicators
Compartment walls and floors in Clap Hill
For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Clap Hill lies roughly 53 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product.
For a building at a site such as Evegate Business Park, which lies north-east of Clap Hill, a check of penetration seals after each fit-out is good practice. For a school such as Aldington Primary School, penetration sealing fits best at the end of the summer works. Shop fits in centres such as Ashford Retail Park, 2.9 miles north-west of Clap Hill, can bring new services through fire-resisting walls between units, which then need the specified seal.
Clap Hill is about 4 miles south-east of Ashford, in Kent. Commercial clients in Clap Hill can call on us for service penetrations, as part of our coverage of Kent. 931 places across Kent fall within our area, Clap Hill among them. For work in that direction, see our Brighton page.
Business premises anywhere in TN25 are within our area. Close to Clap Hill, our area also takes in Aldington (1 mile south-east), Stonestreet Green (1 mile east), Bonnington (1 mile south-west), Aldington Frith (1 mile west) and Postling Green (1 mile south-east). Bigger towns within reach include Ashford (4 miles north-west), Canterbury (14 miles north-east), Folkestone (10 miles east), Faversham (15 miles north), Hythe (6 miles east) and Preston (15 miles north).
Landmarks near Clap Hill
In Clap Hill, that means premises near Poulton Wood and Walnut Tree Inn and the streets around them. The nearest railway station is Ham Street station, roughly 4.1 miles south-west of the centre. Well-known places in the area include Lympne Castle (4.1 miles south-east) and William Harvey Hospital (3.3 miles north). For a walk, there’s Hatch Park.
When to bring in a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.