Fire-rated sealing and fire stopping in Aldington, Kent
Fire-rated and intumescent sealing of service penetrations and linear gaps in Aldington and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.
- Service penetrations left open after M&E works
- Improvised or mixed-product fire seals
- Expanding foam used as fire stopping
Fire stopping near Aldington
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Aldington
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. We work on small duct penetrations where the tested detail allows, service gaps in risers and pipe penetrations, and the failures we are asked to look at most are fire stopping installed outside its tested range and damaged fire seals in risers and voids. Facilities teams, main contractors and managing agents in Aldington tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
A job near Aldington is normally planned around one visit, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Aldington (TN25)
- Region
- Kent
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What affects the price in Aldington
Quotes vary with the job. It mainly depends on:
- Any access equipment needed
- Phasing around occupants
- Induction, permit and paperwork requirements
- Removal of failed or old sealant
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- The asbestos register, for older buildings
- Anything awkward about access or site hours
- Photos of the joints, close up and from further back
- The product your specification calls for
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or email the details over to discuss it first.
Why it’s worth doing now in Aldington
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. For buildings around smaller places like Aldington, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Why clients in Aldington choose us
- Clear, fixed quotes
- Constructionline member for supplier checks
- Work to your specification and the manufacturer’s guidance
- CSCS-carded applicators
Nearby places to Aldington
Other services in Aldington
What the job involves on each surface
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail.
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness.
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Aldington?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Will you take on work at estates like Evegate Business Park, close to Aldington?
Yes, sites like Evegate Business Park are within our area, along with the rest of Aldington. Send details of the unit and the work through our quote form for a quick quote.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Do you work in Aldington?
Yes. Aldington is in our area. For a quote, speak to us on 01277 525 020 or use the quote form.
How long does a typical visit take?
That varies with the scale of the job, but the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Compartments and services around Aldington
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Central London is about 53 miles from Aldington. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
For a school such as Aldington Primary School, penetration sealing fits best at the end of the summer works. Office fit-outs on sites such as Evegate Business Park (1.6 miles north of Aldington) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. In a building such as Church of St Martin, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Aldington is about 5 miles south-east of Ashford, in Kent. Looking for fire stopping in Aldington? We can help, as we do across Kent. Across Kent, 931 places are covered, Aldington among them. For work in that direction, see our Brighton page, about 50 miles away.
Work on service penetrations is covered throughout TN25, for business premises of every kind. Among the streets we cover are Earlsfield, Walnut Ridge and Badgers Close. If your building is just outside Aldington, we cover Clap Hill (1 mile north-west), Stonestreet Green (1 mile north), Bonnington (1 mile south-west), Postling Green (1 mile south-east) and Aldington Frith (1 mile west). Bigger towns within reach include Ashford (5 miles north-west), Canterbury (14 miles north-east), Folkestone (10 miles east), Hythe (6 miles east), Preston (15 miles north) and Hawkinge (10 miles east).
Local landmarks in Aldington
In Aldington, that means premises near Walnut Tree Inn and Poulton Wood and the streets around them. Aldington’s nearest station is Ham Street station, about 4.1 miles south-west. Well-known places in the area include Lympne Castle (3.8 miles east) and William Harvey Hospital (3.6 miles north). The countryside around Aldington includes Hatch Park.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Commercial clients in Aldington
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
From enquiry to sign-off
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. For work around Aldington, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Arrange parking or a loading space
- Agree which areas must stay open
Get a fixed quote
To get a fixed quote, give us a call on 01277 525 020 or email the details over, telling us the site location and the nature of the job. Our quote form is another easy route.