Fire stopping in Chithurst
Looking for fire stopping in Chithurst? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
- Unsealed penetrations discovered above suspended ceilings
Fire stopping for Chithurst sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How a job runs
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and our waste is bagged and taken away as we go. Jobs in and around smaller places like Chithurst are normally planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Make sure the joints can be reached
- For older buildings, check the asbestos register before work
- Confirm the product named in the specification
Getting a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, ring 01277 525 020 or email us.
Related advice
Fire stopping in Chithurst, done properly
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. What we bring is careful installation of the specified sealant, to the maker’s guidance in Chithurst and nearby. The enquiries we see most involve penetration schedules that need working through and unsealed penetrations discovered above suspended ceilings, across pipe penetrations, service gaps in risers and small duct penetrations where the tested detail allows. Whoever orders the work in Chithurst, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places like Chithurst, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Location
- Chithurst (GU31)
- Region
- West Sussex
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What the job involves on each surface
Drylining partitions
Drylined fire walls are tested in a particular build-up. The sealant detail has to be tested in that wall type, with the stated board layers first.
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes. We check the pipe material and diameter against the detail before we start.
How the quote is worked out
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Distance, for remote addresses
- The product specified
- Working within restricted access windows
- Site requirements such as inductions and permits
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Asbestos survey details if the building is older
- Specification clauses that apply
- Access details, including height
- Photos of the joints, close up and from further back
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or call the office on 01277 525 020 or send photos by email if you’d rather talk the job through.
What sealant work can’t fix
Honesty saves time and money. Fresh joints won’t solve:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Issuing fire ratings or certificates for seals
- Openings that need collars, wraps, batts or boards rather than sealant
If in doubt, call the office on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Surfaces we seal
- Linear gaps at wall heads
- Service gaps in risers
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
Compartments and services around Chithurst
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Chithurst lies roughly 46 miles out from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
For a school such as Stedham Primary School, penetration sealing fits best at the end of the summer works. At a healthcare site like Midhurst Community Hospital, 2.9 miles to the east of Chithurst, new services through compartment walls are a constant, and each needs the specified seal.
Chithurst is about 6 miles east of Petersfield, in West Sussex. We send applicators to Chithurst for service penetrations. Our West Sussex coverage takes in 373 places, from busy centres to rural villages. We also cover Portsmouth, around 18 miles from Chithurst.
Postcode districts covered here: GU31 for service penetrations. Close to Chithurst, our area also takes in Trotton Marsh (1 mile north-west), Borden (1 mile north-west), Rogate (2 miles west), Milland (2 miles north) and Rake (4 miles north-west). A short drive away, we cover Bognor Regis (15 miles south), Chichester (11 miles south), Billingshurst (15 miles east), Portfield (11 miles south), Yapton (15 miles south-east) and Midhurst (3 miles south-east).
Around Chithurst
In Chithurst, that means premises near The Keeper's Arms Public House and the streets around them. Chithurst’s nearest station is Liphook station, roughly 4.9 miles north. Nearby you’ll also find Midhurst Museum (2.9 miles east) and Midhurst Community Hospital (2.9 miles east). For a walk, there’s Wheeler's Down and Iping and Stedham Commons.
Questions about Chithurst
Do you take on work at healthcare sites like Midhurst Community Hospital?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Is Midhurst Business Centre, near Chithurst, within your area?
Yes. Our area takes in Chithurst and its surroundings, with estates and business parks such as Midhurst Business Centre included. To start, just speak to us on 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Is it fine to apply new sealant on top of old?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Can the sealant be colour-matched?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Can you quote from photographs?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Do you work in Chithurst?
Yes. We take on work across Chithurst, with one number for every area we cover.
Why act early in Chithurst
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Halls, stores and units around places like Chithurst may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why clients in Chithurst choose us
- Fixed quotes based on photos, drawings or a visit
- Joints cleaned back to sound surfaces
- Public liability insurance in place
- A Constructionline member, so easy to vet
Take a look at what affects the cost or how we’re accredited.
Towns and villages near Chithurst
More services for Chithurst
Signs you need fire stopping in Chithurst
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is when untested combinations creep in.
These are often picked up first by site or facilities staff:
- Snag lists that include open service penetrations
- Improvised or mixed-product fire seals
- Damaged fire seals in risers and voids
- Openings found when ceilings come down for a refit
For a building at a site such as Midhurst Business Centre, 2.5 miles to the south-east of Chithurst, a check of penetration seals after each fit-out is good practice.
What your quote should include
- Will CSCS-carded applicators be on site?
- Whether primer will be used where the manufacturer specifies it
- Is the sealant right for the movement and the substrate?
- How joint depth will be controlled