Fire Stopping in Milland
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Milland and the surrounding area. Send details for a fixed quote.
- Service penetrations left open after M&E works
- Fire stopping installed outside its tested range
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Milland
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Milland
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. We work on joints between fire-resisting walls and floors, service gaps in risers and cable penetrations, and the usual reasons a site gets in touch are unsealed joints where partitions meet the slab and damaged fire seals in risers and voids. One point of contact handles commercial sealant work in Milland from the first photographs to the final walk-round, whether it’s one building or several.
Barn and farm-building conversions near places like Milland often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Milland (GU30)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When to call us in Milland
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access normally bring them to light.
These are often picked up first by site or facilities staff:
- Builders’ foam or ordinary silicone in compartment walls
- Open linear gaps along the top of fire-resisting walls
- Openings left by services added after handover
- Hidden openings found during inspections
For a school such as Hollycombe Primary School, penetration sealing fits best at the end of the summer works.
Questions to ask before you book
- Who will actually carry out the work
- Health and safety accreditation such as CHAS
- Which product they’ll use, and why it suits the joint
- How they handle RAMS and site documents
Towns and villages near Milland
Also in Milland
Quoting for work in Milland
The price varies from site to site. Expect it to depend on:
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
- Access and working height
- The total length or number of joints
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Details that help us quote
A good diagnosis starts with the right details. Tell us:
- The asbestos register, for older buildings
- Drawings or a marked-up plan, if available
- Anything awkward about access or site hours
- The product your specification calls for
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, phone 01277 525 020 or email drawings and photos.
For managing agents and facilities managers
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Why act early in Milland
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. One visit to deal with every failing joint makes more sense than several trips to a place like Milland, rather than one at a time. Photos of every joint help us quote for the whole job.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why choose Mastic Doctor in Milland
- Clear, fixed quotes
- Over 20 years of commercial sealing
- Joints cleaned back to sound surfaces
- Constructionline member
What the job involves on each surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point so we know it sits within the tested range, and any outside it are raised with you.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance, including keys, permits and any isolations.
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Smaller jobs around Milland can be grouped with others nearby. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Arrange parking or a loading space
- Tell staff and tenants when we’ll be in
- Tell us your opening times and when work is allowed
Quotes
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or call 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Read more
Fire-rated sealing for Milland buildings
Milland is about 44 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal. In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Older community buildings such as Tuxlith Chapel that have been rewired or given new heating can have service gaps through walls worth checking against the specification. At a healthcare site like Midhurst Community Hospital (4.3 miles south-east of Milland), new services through compartment walls are a constant, and each needs the specified seal.
Milland is about 6 miles east of Petersfield, in West Sussex. We cover Milland, with the same fixed quotes and 12-month guarantee as everywhere else. Across West Sussex, 373 places are covered, Milland among them. Sites around Portsmouth have their own page, about 20 miles away.
Work on service penetrations is covered throughout GU30, whatever the building. If your site is on Milland Lane, Mill Vale Meadows and Drakeleys Field or close by, send details and we will quote for service penetrations. Nearby places we also cover include Trotton Marsh (1 mile south), Borden (2 miles south-west), Rake (2 miles west), Chithurst (2 miles south) and Rogate (3 miles south-west) for service penetrations. Nearby towns on our patch include Chichester (14 miles south), Billingshurst (15 miles east), Portfield (14 miles south), Midhurst (5 miles south-east), Southbourne (14 miles south) and Pulborough (14 miles east).
What’s near Milland
In Milland, that means premises near The Rising Sun pub. Milland’s nearest station is Liphook station, roughly 2.4 miles north. Other landmarks nearby include Midhurst Community Hospital (4.3 miles south-east). For a walk, there’s Wheeler's Down and Lynchmere Commons.
FAQs: Milland
Is a hospital such as Midhurst Community Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Is Milland too small for you to travel to?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Do you seal openings left by new services?
Yes, where there is a specification for those walls and floors. New services after M&E works often breach existing seals.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.